google-native.pubsub/v1.getSubscription

func LookupSubscription(ctx *Context, args *LookupSubscriptionArgs, opts ...InvokeOption) (*LookupSubscriptionResult, error)
func LookupSubscriptionOutput(ctx *Context, args *LookupSubscriptionOutputArgs, opts ...InvokeOption) LookupSubscriptionResultOutput

> Note: This function is named LookupSubscription in the Go SDK.

SubscriptionId string

Project string

SubscriptionId string

Project string

subscriptionId String

project String

subscriptionId string

project string

subscription_id str

project str

subscriptionId String

project String

AckDeadlineSeconds int

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

BigqueryConfig Pulumi.GoogleNative.Pubsub.V1.Outputs.BigQueryConfigResponse

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

CloudStorageConfig Pulumi.GoogleNative.Pubsub.V1.Outputs.CloudStorageConfigResponse

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

DeadLetterPolicy Pulumi.GoogleNative.Pubsub.V1.Outputs.DeadLetterPolicyResponse

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

Detached bool

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

EnableExactlyOnceDelivery bool

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

EnableMessageOrdering bool

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

ExpirationPolicy Pulumi.GoogleNative.Pubsub.V1.Outputs.ExpirationPolicyResponse

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

Filter string

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

Labels Dictionary<string, string>

Optional. See Creating and managing labels.

MessageRetentionDuration string

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

Name string

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

PushConfig Pulumi.GoogleNative.Pubsub.V1.Outputs.PushConfigResponse

Optional. If push delivery is used with this subscription, this field is used to configure it.

RetainAckedMessages bool

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

RetryPolicy Pulumi.GoogleNative.Pubsub.V1.Outputs.RetryPolicyResponse

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

State string

An output-only field indicating whether or not the subscription can receive messages.

Topic string

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

TopicMessageRetentionDuration string

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

AckDeadlineSeconds int

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

BigqueryConfig BigQueryConfigResponse

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

CloudStorageConfig CloudStorageConfigResponse

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

DeadLetterPolicy DeadLetterPolicyResponse

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

Detached bool

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

EnableExactlyOnceDelivery bool

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

EnableMessageOrdering bool

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

ExpirationPolicy ExpirationPolicyResponse

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

Filter string

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

Labels map[string]string

Optional. See Creating and managing labels.

MessageRetentionDuration string

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

Name string

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

PushConfig PushConfigResponse

Optional. If push delivery is used with this subscription, this field is used to configure it.

RetainAckedMessages bool

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

RetryPolicy RetryPolicyResponse

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

State string

An output-only field indicating whether or not the subscription can receive messages.

Topic string

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

TopicMessageRetentionDuration string

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

ackDeadlineSeconds Integer

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

bigqueryConfig BigQueryConfigResponse

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

cloudStorageConfig CloudStorageConfigResponse

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

deadLetterPolicy DeadLetterPolicyResponse

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

detached Boolean

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

enableExactlyOnceDelivery Boolean

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

enableMessageOrdering Boolean

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

expirationPolicy ExpirationPolicyResponse

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

filter String

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

labels Map<String,String>

Optional. See Creating and managing labels.

messageRetentionDuration String

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

name String

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

pushConfig PushConfigResponse

Optional. If push delivery is used with this subscription, this field is used to configure it.

retainAckedMessages Boolean

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

retryPolicy RetryPolicyResponse

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

state String

An output-only field indicating whether or not the subscription can receive messages.

topic String

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

topicMessageRetentionDuration String

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

ackDeadlineSeconds number

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

bigqueryConfig BigQueryConfigResponse

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

cloudStorageConfig CloudStorageConfigResponse

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

deadLetterPolicy DeadLetterPolicyResponse

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

detached boolean

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

enableExactlyOnceDelivery boolean

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

enableMessageOrdering boolean

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

expirationPolicy ExpirationPolicyResponse

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

filter string

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

labels {[key: string]: string}

Optional. See Creating and managing labels.

messageRetentionDuration string

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

name string

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

pushConfig PushConfigResponse

Optional. If push delivery is used with this subscription, this field is used to configure it.

retainAckedMessages boolean

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

retryPolicy RetryPolicyResponse

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

state string

An output-only field indicating whether or not the subscription can receive messages.

topic string

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

topicMessageRetentionDuration string

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

ack_deadline_seconds int

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

bigquery_config BigQueryConfigResponse

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

cloud_storage_config CloudStorageConfigResponse

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

dead_letter_policy DeadLetterPolicyResponse

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

detached bool

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

enable_exactly_once_delivery bool

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

enable_message_ordering bool

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

expiration_policy ExpirationPolicyResponse

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

filter str

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

labels Mapping[str, str]

Optional. See Creating and managing labels.

message_retention_duration str

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

name str

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

push_config PushConfigResponse

Optional. If push delivery is used with this subscription, this field is used to configure it.

retain_acked_messages bool

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

retry_policy RetryPolicyResponse

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

state str

An output-only field indicating whether or not the subscription can receive messages.

topic str

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

topic_message_retention_duration str

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

ackDeadlineSeconds Number

Optional. The approximate amount of time (on a best-effort basis) Pub/Sub waits for the subscriber to acknowledge receipt before resending the message. In the interval after the message is delivered and before it is acknowledged, it is considered to be outstanding. During that time period, the message will not be redelivered (on a best-effort basis). For pull subscriptions, this value is used as the initial value for the ack deadline. To override this value for a given message, call ModifyAckDeadline with the corresponding ack_id if using non-streaming pull or send the ack_id in a StreamingModifyAckDeadlineRequest if using streaming pull. The minimum custom deadline you can specify is 10 seconds. The maximum custom deadline you can specify is 600 seconds (10 minutes). If this parameter is 0, a default value of 10 seconds is used. For push delivery, this value is also used to set the request timeout for the call to the push endpoint. If the subscriber never acknowledges the message, the Pub/Sub system will eventually redeliver the message.

bigqueryConfig Property Map

Optional. If delivery to BigQuery is used with this subscription, this field is used to configure it.

cloudStorageConfig Property Map

Optional. If delivery to Google Cloud Storage is used with this subscription, this field is used to configure it.

deadLetterPolicy Property Map

Optional. A policy that specifies the conditions for dead lettering messages in this subscription. If dead_letter_policy is not set, dead lettering is disabled. The Pub/Sub service account associated with this subscriptions's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Acknowledge() messages on this subscription.

detached Boolean

Optional. Indicates whether the subscription is detached from its topic. Detached subscriptions don't receive messages from their topic and don't retain any backlog. Pull and StreamingPull requests will return FAILED_PRECONDITION. If the subscription is a push subscription, pushes to the endpoint will not be made.

enableExactlyOnceDelivery Boolean

Optional. If true, Pub/Sub provides the following guarantees for the delivery of a message with a given value of message_id on this subscription: * The message sent to a subscriber is guaranteed not to be resent before the message's acknowledgement deadline expires. * An acknowledged message will not be resent to a subscriber. Note that subscribers may still receive multiple copies of a message when enable_exactly_once_delivery is true if the message was published multiple times by a publisher client. These copies are considered distinct by Pub/Sub and have distinct message_id values.

enableMessageOrdering Boolean

Optional. If true, messages published with the same ordering_key in PubsubMessage will be delivered to the subscribers in the order in which they are received by the Pub/Sub system. Otherwise, they may be delivered in any order.

expirationPolicy Property Map

Optional. A policy that specifies the conditions for this subscription's expiration. A subscription is considered active as long as any connected subscriber is successfully consuming messages from the subscription or is issuing operations on the subscription. If expiration_policy is not set, a default policy with ttl of 31 days will be used. The minimum allowed value for expiration_policy.ttl is 1 day. If expiration_policy is set, but expiration_policy.ttl is not set, the subscription never expires.

filter String

Optional. An expression written in the Pub/Sub filter language. If non-empty, then only PubsubMessages whose attributes field matches the filter are delivered on this subscription. If empty, then no messages are filtered out.

labels Map<String>

Optional. See Creating and managing labels.

messageRetentionDuration String

Optional. How long to retain unacknowledged messages in the subscription's backlog, from the moment a message is published. If retain_acked_messages is true, then this also configures the retention of acknowledged messages, and thus configures how far back in time a Seek can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10 minutes.

name String

The name of the subscription. It must have the format "projects/{project}/subscriptions/{subscription}". {subscription} must start with a letter, and contain only letters ([A-Za-z]), numbers ([0-9]), dashes (-), underscores (_), periods (.), tildes (~), plus (+) or percent signs (%). It must be between 3 and 255 characters in length, and it must not start with "goog".

pushConfig Property Map

Optional. If push delivery is used with this subscription, this field is used to configure it.

retainAckedMessages Boolean

Optional. Indicates whether to retain acknowledged messages. If true, then messages are not expunged from the subscription's backlog, even if they are acknowledged, until they fall out of the message_retention_duration window. This must be true if you would like to [Seek to a timestamp] (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in the past to replay previously-acknowledged messages.

retryPolicy Property Map

Optional. A policy that specifies how Pub/Sub retries message delivery for this subscription. If not set, the default retry policy is applied. This generally implies that messages will be retried as soon as possible for healthy subscribers. RetryPolicy will be triggered on NACKs or acknowledgement deadline exceeded events for a given message.

state String

An output-only field indicating whether or not the subscription can receive messages.

topic String

The name of the topic from which this subscription is receiving messages. Format is projects/{project}/topics/{topic}. The value of this field will be _deleted-topic_ if the topic has been deleted.

topicMessageRetentionDuration String

Indicates the minimum duration for which a message is retained after it is published to the subscription's topic. If this field is set, messages published to the subscription's topic in the last topic_message_retention_duration are always available to subscribers. See the message_retention_duration field in Topic. This field is set only in responses from the server; it is ignored if it is set in any requests.

WriteMetadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

WriteMetadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

writeMetadata Boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

writeMetadata boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

write_metadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

writeMetadata Boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key as additional fields in the output. The subscription name, message_id, and publish_time fields are put in their own fields while all other message properties other than data (for example, an ordering_key, if present) are added as entries in the attributes map.

DropUnknownFields bool

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

State string

An output-only field that indicates whether or not the subscription can receive messages.

Table string

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

UseTopicSchema bool

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

WriteMetadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

DropUnknownFields bool

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

State string

An output-only field that indicates whether or not the subscription can receive messages.

Table string

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

UseTopicSchema bool

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

WriteMetadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

dropUnknownFields Boolean

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

state String

An output-only field that indicates whether or not the subscription can receive messages.

table String

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

useTopicSchema Boolean

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

writeMetadata Boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

dropUnknownFields boolean

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

state string

An output-only field that indicates whether or not the subscription can receive messages.

table string

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

useTopicSchema boolean

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

writeMetadata boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

drop_unknown_fields bool

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

state str

An output-only field that indicates whether or not the subscription can receive messages.

table str

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

use_topic_schema bool

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

write_metadata bool

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

dropUnknownFields Boolean

Optional. When true and use_topic_schema is true, any fields that are a part of the topic schema that are not part of the BigQuery table schema are dropped when writing to BigQuery. Otherwise, the schemas must be kept in sync and any messages with extra fields are not written and remain in the subscription's backlog.

state String

An output-only field that indicates whether or not the subscription can receive messages.

table String

Optional. The name of the table to which to write data, of the form {projectId}.{datasetId}.{tableId}

useTopicSchema Boolean

Optional. When true, use the topic's schema as the columns to write to in BigQuery, if it exists.

writeMetadata Boolean

Optional. When true, write the subscription name, message_id, publish_time, attributes, and ordering_key to additional columns in the table. The subscription name, message_id, and publish_time fields are put in their own columns while all other message properties (other than data) are written to a JSON object in the attributes column.

AvroConfig Pulumi.GoogleNative.Pubsub.V1.Inputs.AvroConfigResponse

Optional. If set, message data will be written to Cloud Storage in Avro format.

Bucket string

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

FilenamePrefix string

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

FilenameSuffix string

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

MaxBytes string

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

MaxDuration string

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

State string

An output-only field that indicates whether or not the subscription can receive messages.

TextConfig Pulumi.GoogleNative.Pubsub.V1.Inputs.TextConfigResponse

Optional. If set, message data will be written to Cloud Storage in text format.

AvroConfig AvroConfigResponse

Optional. If set, message data will be written to Cloud Storage in Avro format.

Bucket string

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

FilenamePrefix string

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

FilenameSuffix string

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

MaxBytes string

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

MaxDuration string

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

State string

An output-only field that indicates whether or not the subscription can receive messages.

TextConfig TextConfigResponse

Optional. If set, message data will be written to Cloud Storage in text format.

avroConfig AvroConfigResponse

Optional. If set, message data will be written to Cloud Storage in Avro format.

bucket String

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

filenamePrefix String

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

filenameSuffix String

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

maxBytes String

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

maxDuration String

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

state String

An output-only field that indicates whether or not the subscription can receive messages.

textConfig TextConfigResponse

Optional. If set, message data will be written to Cloud Storage in text format.

avroConfig AvroConfigResponse

Optional. If set, message data will be written to Cloud Storage in Avro format.

bucket string

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

filenamePrefix string

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

filenameSuffix string

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

maxBytes string

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

maxDuration string

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

state string

An output-only field that indicates whether or not the subscription can receive messages.

textConfig TextConfigResponse

Optional. If set, message data will be written to Cloud Storage in text format.

avro_config AvroConfigResponse

Optional. If set, message data will be written to Cloud Storage in Avro format.

bucket str

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

filename_prefix str

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

filename_suffix str

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

max_bytes str

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

max_duration str

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

state str

An output-only field that indicates whether or not the subscription can receive messages.

text_config TextConfigResponse

Optional. If set, message data will be written to Cloud Storage in text format.

avroConfig Property Map

Optional. If set, message data will be written to Cloud Storage in Avro format.

bucket String

User-provided name for the Cloud Storage bucket. The bucket must be created by the user. The bucket name must be without any prefix like "gs://". See the [bucket naming requirements] (https://cloud.google.com/storage/docs/buckets#naming).

filenamePrefix String

Optional. User-provided prefix for Cloud Storage filename. See the object naming requirements.

filenameSuffix String

Optional. User-provided suffix for Cloud Storage filename. See the object naming requirements. Must not end in "/".

maxBytes String

Optional. The maximum bytes that can be written to a Cloud Storage file before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may be exceeded in cases where messages are larger than the limit.

maxDuration String

Optional. The maximum duration that can elapse before a new Cloud Storage file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not exceed the subscription's acknowledgement deadline.

state String

An output-only field that indicates whether or not the subscription can receive messages.

textConfig Property Map

Optional. If set, message data will be written to Cloud Storage in text format.

DeadLetterTopic string

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

MaxDeliveryAttempts int

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

DeadLetterTopic string

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

MaxDeliveryAttempts int

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

deadLetterTopic String

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

maxDeliveryAttempts Integer

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

deadLetterTopic string

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

maxDeliveryAttempts number

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

dead_letter_topic str

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

max_delivery_attempts int

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

deadLetterTopic String

Optional. The name of the topic to which dead letter messages should be published. Format is projects/{project}/topics/{topic}.The Pub/Sub service account associated with the enclosing subscription's parent project (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have permission to Publish() to this topic. The operation will fail if the topic does not exist. Users should ensure that there is a subscription attached to this topic since messages published to a topic with no subscriptions are lost.

maxDeliveryAttempts Number

Optional. The maximum number of delivery attempts for any message. The value must be between 5 and 100. The number of delivery attempts is defined as 1 + (the sum of number of NACKs and number of times the acknowledgement deadline has been exceeded for the message). A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that client libraries may automatically extend ack_deadlines. This field will be honored on a best effort basis. If this parameter is 0, a default value of 5 is used.

Ttl string

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

Ttl string

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

ttl String

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

ttl string

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

ttl str

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

ttl String

Optional. Specifies the "time-to-live" duration for an associated resource. The resource expires if it is not active for a period of ttl. The definition of "activity" depends on the type of the associated resource. The minimum and maximum allowed values for ttl depend on the type of the associated resource, as well. If ttl is not set, the associated resource never expires.

WriteMetadata bool

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

WriteMetadata bool

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

writeMetadata Boolean

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

writeMetadata boolean

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

write_metadata bool

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

writeMetadata Boolean

Optional. When true, writes the Pub/Sub message metadata to x-goog-pubsub-: headers of the HTTP request. Writes the Pub/Sub message attributes to : headers of the HTTP request.

Audience string

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

ServiceAccountEmail string

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

Audience string

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

ServiceAccountEmail string

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

audience String

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

serviceAccountEmail String

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

audience string

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

serviceAccountEmail string

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

audience str

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

service_account_email str

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

audience String

Optional. Audience to be used when generating OIDC token. The audience claim identifies the recipients that the JWT is intended for. The audience value is a single case-sensitive string. Having multiple values (array) for the audience field is not supported. More info about the OIDC JWT token audience here: https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified, the Push endpoint URL will be used.

serviceAccountEmail String

Optional. Service account email used for generating the OIDC token. For more information on setting up authentication, see Push subscriptions.

Attributes Dictionary<string, string>

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

NoWrapper Pulumi.GoogleNative.Pubsub.V1.Inputs.NoWrapperResponse

Optional. When set, the payload to the push endpoint is not wrapped.

OidcToken Pulumi.GoogleNative.Pubsub.V1.Inputs.OidcTokenResponse

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

PubsubWrapper Pulumi.GoogleNative.Pubsub.V1.Inputs.PubsubWrapperResponse

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

PushEndpoint string

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

Attributes map[string]string

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

NoWrapper NoWrapperResponse

Optional. When set, the payload to the push endpoint is not wrapped.

OidcToken OidcTokenResponse

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

PubsubWrapper PubsubWrapperResponse

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

PushEndpoint string

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

attributes Map<String,String>

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

noWrapper NoWrapperResponse

Optional. When set, the payload to the push endpoint is not wrapped.

oidcToken OidcTokenResponse

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

pubsubWrapper PubsubWrapperResponse

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

pushEndpoint String

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

attributes {[key: string]: string}

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

noWrapper NoWrapperResponse

Optional. When set, the payload to the push endpoint is not wrapped.

oidcToken OidcTokenResponse

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

pubsubWrapper PubsubWrapperResponse

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

pushEndpoint string

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

attributes Mapping[str, str]

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

no_wrapper NoWrapperResponse

Optional. When set, the payload to the push endpoint is not wrapped.

oidc_token OidcTokenResponse

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

pubsub_wrapper PubsubWrapperResponse

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

push_endpoint str

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

attributes Map<String>

Optional. Endpoint configuration attributes that can be used to control different aspects of the message delivery. The only currently supported attribute is x-goog-version, which you can use to change the format of the pushed message. This attribute indicates the version of the data expected by the endpoint. This controls the shape of the pushed message (i.e., its fields and metadata). If not present during the CreateSubscription call, it will default to the version of the Pub/Sub API used to make such call. If not present in a ModifyPushConfig call, its value will not be changed. GetSubscription calls will always return a valid version, even if the subscription was created without this attribute. The only supported values for the x-goog-version attribute are: * v1beta1: uses the push format defined in the v1beta1 Pub/Sub API. * v1 or v1beta2: uses the push format defined in the v1 Pub/Sub API. For example: attributes { "x-goog-version": "v1" }

noWrapper Property Map

Optional. When set, the payload to the push endpoint is not wrapped.

oidcToken Property Map

Optional. If specified, Pub/Sub will generate and attach an OIDC JWT token as an Authorization header in the HTTP request for every pushed message.

pubsubWrapper Property Map

Optional. When set, the payload to the push endpoint is in the form of the JSON representation of a PubsubMessage (https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#pubsubmessage).

pushEndpoint String

Optional. A URL locating the endpoint to which messages should be pushed. For example, a Webhook endpoint might use https://example.com/push.

MaximumBackoff string

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

MinimumBackoff string

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.

MaximumBackoff string

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

MinimumBackoff string

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.

maximumBackoff String

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

minimumBackoff String

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.

maximumBackoff string

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

minimumBackoff string

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.

maximum_backoff str

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

minimum_backoff str

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.

maximumBackoff String

Optional. The maximum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 600 seconds.

minimumBackoff String

Optional. The minimum delay between consecutive deliveries of a given message. Value should be between 0 and 600 seconds. Defaults to 10 seconds.