google-native.compute/v1.getBackendService

func LookupBackendService(ctx *Context, args *LookupBackendServiceArgs, opts ...InvokeOption) (*LookupBackendServiceResult, error)
func LookupBackendServiceOutput(ctx *Context, args *LookupBackendServiceOutputArgs, opts ...InvokeOption) LookupBackendServiceResultOutput

> Note: This function is named LookupBackendService in the Go SDK.

BackendService string

Project string

BackendService string

Project string

backendService String

project String

backendService string

project string

backend_service str

project str

backendService String

project String

AffinityCookieTtlSec int

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

Backends List<Pulumi.GoogleNative.Compute.V1.Outputs.BackendResponse>

The list of backends that serve this BackendService.

CdnPolicy Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceCdnPolicyResponse

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

CircuitBreakers Pulumi.GoogleNative.Compute.V1.Outputs.CircuitBreakersResponse

CompressionMode string

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

ConnectionDraining Pulumi.GoogleNative.Compute.V1.Outputs.ConnectionDrainingResponse

ConnectionTrackingPolicy Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceConnectionTrackingPolicyResponse

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

ConsistentHash Pulumi.GoogleNative.Compute.V1.Outputs.ConsistentHashLoadBalancerSettingsResponse

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

CreationTimestamp string

Creation timestamp in RFC3339 text format.

CustomRequestHeaders List<string>

Headers that the load balancer adds to proxied requests. See Creating custom headers.

CustomResponseHeaders List<string>

Headers that the load balancer adds to proxied responses. See Creating custom headers.

Description string

An optional description of this resource. Provide this property when you create the resource.

EdgeSecurityPolicy string

The resource URL for the edge security policy associated with this backend service.

EnableCDN bool

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

FailoverPolicy Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceFailoverPolicyResponse

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

Fingerprint string

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

HealthChecks List<string>

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

Iap Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceIAPResponse

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

Kind string

Type of resource. Always compute#backendService for backend services.

LoadBalancingScheme string

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

LocalityLbPolicies List<Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceLocalityLoadBalancingPolicyConfigResponse>

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

LocalityLbPolicy string

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

LogConfig Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceLogConfigResponse

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

MaxStreamDuration Pulumi.GoogleNative.Compute.V1.Outputs.DurationResponse

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

Metadatas Dictionary<string, string>

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

Name string

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

Network string

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

OutlierDetection Pulumi.GoogleNative.Compute.V1.Outputs.OutlierDetectionResponse

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

Port int

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

PortName string

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

Protocol string

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

Region string

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

SecurityPolicy string

The resource URL for the security policy associated with this backend service.

SecuritySettings Pulumi.GoogleNative.Compute.V1.Outputs.SecuritySettingsResponse

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

SelfLink string

Server-defined URL for the resource.

ServiceBindings List<string>

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

SessionAffinity string

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

Subsetting Pulumi.GoogleNative.Compute.V1.Outputs.SubsettingResponse

TimeoutSec int

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

UsedBy List<Pulumi.GoogleNative.Compute.V1.Outputs.BackendServiceUsedByResponse>

AffinityCookieTtlSec int

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

Backends []BackendResponse

The list of backends that serve this BackendService.

CdnPolicy BackendServiceCdnPolicyResponse

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

CircuitBreakers CircuitBreakersResponse

CompressionMode string

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

ConnectionDraining ConnectionDrainingResponse

ConnectionTrackingPolicy BackendServiceConnectionTrackingPolicyResponse

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

ConsistentHash ConsistentHashLoadBalancerSettingsResponse

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

CreationTimestamp string

Creation timestamp in RFC3339 text format.

CustomRequestHeaders []string

Headers that the load balancer adds to proxied requests. See Creating custom headers.

CustomResponseHeaders []string

Headers that the load balancer adds to proxied responses. See Creating custom headers.

Description string

An optional description of this resource. Provide this property when you create the resource.

EdgeSecurityPolicy string

The resource URL for the edge security policy associated with this backend service.

EnableCDN bool

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

FailoverPolicy BackendServiceFailoverPolicyResponse

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

Fingerprint string

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

HealthChecks []string

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

Iap BackendServiceIAPResponse

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

Kind string

Type of resource. Always compute#backendService for backend services.

LoadBalancingScheme string

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

LocalityLbPolicies []BackendServiceLocalityLoadBalancingPolicyConfigResponse

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

LocalityLbPolicy string

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

LogConfig BackendServiceLogConfigResponse

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

MaxStreamDuration DurationResponse

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

Metadatas map[string]string

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

Name string

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

Network string

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

OutlierDetection OutlierDetectionResponse

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

Port int

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

PortName string

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

Protocol string

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

Region string

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

SecurityPolicy string

The resource URL for the security policy associated with this backend service.

SecuritySettings SecuritySettingsResponse

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

SelfLink string

Server-defined URL for the resource.

ServiceBindings []string

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

SessionAffinity string

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

Subsetting SubsettingResponse

TimeoutSec int

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

UsedBy []BackendServiceUsedByResponse

affinityCookieTtlSec Integer

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

backends List<BackendResponse>

The list of backends that serve this BackendService.

cdnPolicy BackendServiceCdnPolicyResponse

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

circuitBreakers CircuitBreakersResponse

compressionMode String

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

connectionDraining ConnectionDrainingResponse

connectionTrackingPolicy BackendServiceConnectionTrackingPolicyResponse

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

consistentHash ConsistentHashLoadBalancerSettingsResponse

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

creationTimestamp String

Creation timestamp in RFC3339 text format.

customRequestHeaders List<String>

Headers that the load balancer adds to proxied requests. See Creating custom headers.

customResponseHeaders List<String>

Headers that the load balancer adds to proxied responses. See Creating custom headers.

description String

An optional description of this resource. Provide this property when you create the resource.

edgeSecurityPolicy String

The resource URL for the edge security policy associated with this backend service.

enableCDN Boolean

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

failoverPolicy BackendServiceFailoverPolicyResponse

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

fingerprint String

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

healthChecks List<String>

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

iap BackendServiceIAPResponse

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

kind String

Type of resource. Always compute#backendService for backend services.

loadBalancingScheme String

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

localityLbPolicies List<BackendServiceLocalityLoadBalancingPolicyConfigResponse>

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

localityLbPolicy String

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

logConfig BackendServiceLogConfigResponse

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

maxStreamDuration DurationResponse

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

metadatas Map<String,String>

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

name String

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

network String

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

outlierDetection OutlierDetectionResponse

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

port Integer

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

portName String

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

protocol String

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

region String

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

securityPolicy String

The resource URL for the security policy associated with this backend service.

securitySettings SecuritySettingsResponse

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

selfLink String

Server-defined URL for the resource.

serviceBindings List<String>

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

sessionAffinity String

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

subsetting SubsettingResponse

timeoutSec Integer

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

usedBy List<BackendServiceUsedByResponse>

affinityCookieTtlSec number

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

backends BackendResponse[]

The list of backends that serve this BackendService.

cdnPolicy BackendServiceCdnPolicyResponse

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

circuitBreakers CircuitBreakersResponse

compressionMode string

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

connectionDraining ConnectionDrainingResponse

connectionTrackingPolicy BackendServiceConnectionTrackingPolicyResponse

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

consistentHash ConsistentHashLoadBalancerSettingsResponse

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

creationTimestamp string

Creation timestamp in RFC3339 text format.

customRequestHeaders string[]

Headers that the load balancer adds to proxied requests. See Creating custom headers.

customResponseHeaders string[]

Headers that the load balancer adds to proxied responses. See Creating custom headers.

description string

An optional description of this resource. Provide this property when you create the resource.

edgeSecurityPolicy string

The resource URL for the edge security policy associated with this backend service.

enableCDN boolean

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

failoverPolicy BackendServiceFailoverPolicyResponse

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

fingerprint string

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

healthChecks string[]

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

iap BackendServiceIAPResponse

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

kind string

Type of resource. Always compute#backendService for backend services.

loadBalancingScheme string

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

localityLbPolicies BackendServiceLocalityLoadBalancingPolicyConfigResponse[]

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

localityLbPolicy string

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

logConfig BackendServiceLogConfigResponse

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

maxStreamDuration DurationResponse

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

metadatas {[key: string]: string}

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

name string

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

network string

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

outlierDetection OutlierDetectionResponse

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

port number

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

portName string

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

protocol string

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

region string

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

securityPolicy string

The resource URL for the security policy associated with this backend service.

securitySettings SecuritySettingsResponse

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

selfLink string

Server-defined URL for the resource.

serviceBindings string[]

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

sessionAffinity string

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

subsetting SubsettingResponse

timeoutSec number

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

usedBy BackendServiceUsedByResponse[]

affinity_cookie_ttl_sec int

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

backends Sequence[BackendResponse]

The list of backends that serve this BackendService.

cdn_policy BackendServiceCdnPolicyResponse

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

circuit_breakers CircuitBreakersResponse

compression_mode str

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

connection_draining ConnectionDrainingResponse

connection_tracking_policy BackendServiceConnectionTrackingPolicyResponse

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

consistent_hash ConsistentHashLoadBalancerSettingsResponse

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

creation_timestamp str

Creation timestamp in RFC3339 text format.

custom_request_headers Sequence[str]

Headers that the load balancer adds to proxied requests. See Creating custom headers.

custom_response_headers Sequence[str]

Headers that the load balancer adds to proxied responses. See Creating custom headers.

description str

An optional description of this resource. Provide this property when you create the resource.

edge_security_policy str

The resource URL for the edge security policy associated with this backend service.

enable_cdn bool

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

failover_policy BackendServiceFailoverPolicyResponse

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

fingerprint str

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

health_checks Sequence[str]

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

iap BackendServiceIAPResponse

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

kind str

Type of resource. Always compute#backendService for backend services.

load_balancing_scheme str

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

locality_lb_policies Sequence[BackendServiceLocalityLoadBalancingPolicyConfigResponse]

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

locality_lb_policy str

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

log_config BackendServiceLogConfigResponse

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

max_stream_duration DurationResponse

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

metadatas Mapping[str, str]

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

name str

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

network str

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

outlier_detection OutlierDetectionResponse

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

port int

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

port_name str

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

protocol str

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

region str

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

security_policy str

The resource URL for the security policy associated with this backend service.

security_settings SecuritySettingsResponse

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

self_link str

Server-defined URL for the resource.

service_bindings Sequence[str]

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

session_affinity str

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

subsetting SubsettingResponse

timeout_sec int

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

used_by Sequence[BackendServiceUsedByResponse]

affinityCookieTtlSec Number

Lifetime of cookies in seconds. This setting is applicable to external and internal HTTP(S) load balancers and Traffic Director and requires GENERATED_COOKIE or HTTP_COOKIE session affinity. If set to 0, the cookie is non-persistent and lasts only until the end of the browser session (or equivalent). The maximum allowed value is two weeks (1,209,600). Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

backends List<Property Map>

The list of backends that serve this BackendService.

cdnPolicy Property Map

Cloud CDN configuration for this BackendService. Only available for specified load balancer types.

circuitBreakers Property Map

compressionMode String

Compress text responses using Brotli or gzip compression, based on the client's Accept-Encoding header.

connectionDraining Property Map

connectionTrackingPolicy Property Map

Connection Tracking configuration for this BackendService. Connection tracking policy settings are only available for Network Load Balancing and Internal TCP/UDP Load Balancing.

consistentHash Property Map

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service. This field specifies parameters that control consistent hashing. This field is only applicable when localityLbPolicy is set to MAGLEV or RING_HASH. This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

creationTimestamp String

Creation timestamp in RFC3339 text format.

customRequestHeaders List<String>

Headers that the load balancer adds to proxied requests. See Creating custom headers.

customResponseHeaders List<String>

Headers that the load balancer adds to proxied responses. See Creating custom headers.

description String

An optional description of this resource. Provide this property when you create the resource.

edgeSecurityPolicy String

The resource URL for the edge security policy associated with this backend service.

enableCDN Boolean

If true, enables Cloud CDN for the backend service of an external HTTP(S) load balancer.

failoverPolicy Property Map

Requires at least one backend instance group to be defined as a backup (failover) backend. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

fingerprint String

Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a BackendService. An up-to-date fingerprint must be provided in order to update the BackendService, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a BackendService.

healthChecks List<String>

The list of URLs to the healthChecks, httpHealthChecks (legacy), or httpsHealthChecks (legacy) resource for health checking this backend service. Not all backend services support legacy health checks. See Load balancer guide. Currently, at most one health check can be specified for each backend service. Backend services with instance group or zonal NEG backends must have a health check. Backend services with internet or serverless NEG backends must not have a health check.

iap Property Map

The configurations for Identity-Aware Proxy on this resource. Not available for Internal TCP/UDP Load Balancing and Network Load Balancing.

kind String

Type of resource. Always compute#backendService for backend services.

loadBalancingScheme String

Specifies the load balancer type. A backend service created for one type of load balancer cannot be used with another. For more information, refer to Choosing a load balancer.

localityLbPolicies List<Property Map>

A list of locality load-balancing policies to be used in order of preference. When you use localityLbPolicies, you must set at least one value for either the localityLbPolicies[].policy or the localityLbPolicies[].customPolicy field. localityLbPolicies overrides any value set in the localityLbPolicy field. For an example of how to use this field, see Define a list of preferred policies. Caution: This field and its children are intended for use in a service mesh that includes gRPC clients only. Envoy proxies can't use backend services that have this configuration.

localityLbPolicy String

The load balancing algorithm used within the scope of the locality. The possible values are: - ROUND_ROBIN: This is a simple policy in which each healthy backend is selected in round robin order. This is the default. - LEAST_REQUEST: An O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests. - RING_HASH: The ring/modulo hash load balancer implements consistent hashing to backends. The algorithm has the property that the addition/removal of a host from a set of N hosts only affects 1/N of the requests. - RANDOM: The load balancer selects a random healthy host. - ORIGINAL_DESTINATION: Backend host is selected based on the client connection metadata, i.e., connections are opened to the same address as the destination address of the incoming connection before the connection was redirected to the load balancer. - MAGLEV: used as a drop in replacement for the ring hash load balancer. Maglev is not as stable as ring hash but has faster table lookup build times and host selection times. For more information about Maglev, see https://ai.google/research/pubs/pub44824 This field is applicable to either: - A regional backend service with the service_protocol set to HTTP, HTTPS, or HTTP2, and load_balancing_scheme set to INTERNAL_MANAGED. - A global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or EXTERNAL_MANAGED. If sessionAffinity is not NONE, and this field is not set to MAGLEV or RING_HASH, session affinity settings will not take effect. Only ROUND_ROBIN and RING_HASH are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

logConfig Property Map

This field denotes the logging options for the load balancer traffic served by this backend service. If logging is enabled, logs will be exported to Stackdriver.

maxStreamDuration Property Map

Specifies the default maximum duration (timeout) for streams to this service. Duration is computed from the beginning of the stream until the response has been completely processed, including all retries. A stream that does not complete in this duration is closed. If not specified, there will be no timeout limit, i.e. the maximum duration is infinite. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. This field is only allowed when the loadBalancingScheme of the backend service is INTERNAL_SELF_MANAGED.

metadatas Map<String>

Deployment metadata associated with the resource to be set by a GKE hub controller and read by the backend RCTH

name String

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

network String

The URL of the network to which this backend service belongs. This field can only be specified when the load balancing scheme is set to INTERNAL.

outlierDetection Property Map

Settings controlling the ejection of unhealthy backend endpoints from the load balancing pool of each individual proxy instance that processes the traffic for the given backend service. If not set, this feature is considered disabled. Results of the outlier detection algorithm (ejection of endpoints from the load balancing pool and returning them back to the pool) are executed independently by each proxy instance of the load balancer. In most cases, more than one proxy instance handles the traffic received by a backend service. Thus, it is possible that an unhealthy endpoint is detected and ejected by only some of the proxies, and while this happens, other proxies may continue to send requests to the same unhealthy endpoint until they detect and eject the unhealthy endpoint. Applicable backend endpoints can be: - VM instances in an Instance Group - Endpoints in a Zonal NEG (GCE_VM_IP, GCE_VM_IP_PORT) - Endpoints in a Hybrid Connectivity NEG (NON_GCP_PRIVATE_IP_PORT) - Serverless NEGs, that resolve to Cloud Run, App Engine, or Cloud Functions Services - Private Service Connect NEGs, that resolve to Google-managed regional API endpoints or managed services published using Private Service Connect Applicable backend service types can be: - A global backend service with the loadBalancingScheme set to INTERNAL_SELF_MANAGED or EXTERNAL_MANAGED. - A regional backend service with the serviceProtocol set to HTTP, HTTPS, or HTTP2, and loadBalancingScheme set to INTERNAL_MANAGED or EXTERNAL_MANAGED. Not supported for Serverless NEGs. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

port Number

Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

Deprecated: Deprecated in favor of portName. The TCP port to connect on the backend. The default value is 80. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port.

portName String

A named port on a backend instance group representing the port for communication to the backend VMs in that group. The named port must be defined on each backend instance group. This parameter has no meaning if the backends are NEGs. For Internal TCP/UDP Load Balancing and Network Load Balancing, omit port_name.

protocol String

The protocol this BackendService uses to communicate with backends. Possible values are HTTP, HTTPS, HTTP2, TCP, SSL, UDP or GRPC. depending on the chosen load balancer or Traffic Director configuration. Refer to the documentation for the load balancers or for Traffic Director for more information. Must be set to GRPC when the backend service is referenced by a URL map that is bound to target gRPC proxy.

region String

URL of the region where the regional backend service resides. This field is not applicable to global backend services. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

securityPolicy String

The resource URL for the security policy associated with this backend service.

securitySettings Property Map

This field specifies the security settings that apply to this backend service. This field is applicable to a global backend service with the load_balancing_scheme set to INTERNAL_SELF_MANAGED.

selfLink String

Server-defined URL for the resource.

serviceBindings List<String>

URLs of networkservices.ServiceBinding resources. Can only be set if load balancing scheme is INTERNAL_SELF_MANAGED. If set, lists of backends and health checks must be both empty.

sessionAffinity String

Type of session affinity to use. The default is NONE. Only NONE and HEADER_FIELD are supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. For more details, see: Session Affinity.

subsetting Property Map

timeoutSec Number

The backend service timeout has a different meaning depending on the type of load balancer. For more information see, Backend service settings. The default is 30 seconds. The full range of timeout values allowed goes from 1 through 2,147,483,647 seconds. This value can be overridden in the PathMatcher configuration of the UrlMap that references this backend service. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true. Instead, use maxStreamDuration.

usedBy List<Property Map>

AccessKey string

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

AccessKeyId string

The identifier of an access key used for s3 bucket authentication.

AccessKeyVersion string

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

OriginRegion string

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

AccessKey string

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

AccessKeyId string

The identifier of an access key used for s3 bucket authentication.

AccessKeyVersion string

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

OriginRegion string

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

accessKey String

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

accessKeyId String

The identifier of an access key used for s3 bucket authentication.

accessKeyVersion String

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

originRegion String

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

accessKey string

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

accessKeyId string

The identifier of an access key used for s3 bucket authentication.

accessKeyVersion string

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

originRegion string

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

access_key str

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

access_key_id str

The identifier of an access key used for s3 bucket authentication.

access_key_version str

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

origin_region str

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

accessKey String

The access key used for s3 bucket authentication. Required for updating or creating a backend that uses AWS v4 signature authentication, but will not be returned as part of the configuration when queried with a REST API GET request. @InputOnly

accessKeyId String

The identifier of an access key used for s3 bucket authentication.

accessKeyVersion String

The optional version identifier for the access key. You can use this to keep track of different iterations of your access key.

originRegion String

The name of the cloud region of your origin. This is a free-form field with the name of the region your cloud uses to host your origin. For example, "us-east-1" for AWS or "us-ashburn-1" for OCI.

BalancingMode string

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

CapacityScaler double

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

Description string

An optional description of this resource. Provide this property when you create the resource.

Failover bool

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

Group string

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

MaxConnections int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxConnectionsPerEndpoint int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxConnectionsPerInstance int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxRate int

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxRatePerEndpoint double

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxRatePerInstance double

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxUtilization double

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

BalancingMode string

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

CapacityScaler float64

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

Description string

An optional description of this resource. Provide this property when you create the resource.

Failover bool

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

Group string

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

MaxConnections int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxConnectionsPerEndpoint int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxConnectionsPerInstance int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

MaxRate int

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxRatePerEndpoint float64

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxRatePerInstance float64

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

MaxUtilization float64

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

balancingMode String

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

capacityScaler Double

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

description String

An optional description of this resource. Provide this property when you create the resource.

failover Boolean

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

group String

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

maxConnections Integer

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerEndpoint Integer

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerInstance Integer

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxRate Integer

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerEndpoint Double

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerInstance Double

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxUtilization Double

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

balancingMode string

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

capacityScaler number

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

description string

An optional description of this resource. Provide this property when you create the resource.

failover boolean

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

group string

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

maxConnections number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerEndpoint number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerInstance number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxRate number

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerEndpoint number

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerInstance number

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxUtilization number

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

balancing_mode str

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

capacity_scaler float

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

description str

An optional description of this resource. Provide this property when you create the resource.

failover bool

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

group str

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

max_connections int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

max_connections_per_endpoint int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

max_connections_per_instance int

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

max_rate int

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

max_rate_per_endpoint float

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

max_rate_per_instance float

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

max_utilization float

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

balancingMode String

Specifies how to determine whether the backend of a load balancer can handle additional traffic or is fully loaded. For usage guidelines, see Connection balancing mode. Backends must use compatible balancing modes. For more information, see Supported balancing modes and target capacity settings and Restrictions and guidance for instance groups. Note: Currently, if you use the API to configure incompatible balancing modes, the configuration might be accepted even though it has no impact and is ignored. Specifically, Backend.maxUtilization is ignored when Backend.balancingMode is RATE. In the future, this incompatible combination will be rejected.

capacityScaler Number

A multiplier applied to the backend's target capacity of its balancing mode. The default value is 1, which means the group serves up to 100% of its configured capacity (depending on balancingMode). A setting of 0 means the group is completely drained, offering 0% of its available capacity. The valid ranges are 0.0 and [0.1,1.0]. You cannot configure a setting larger than 0 and smaller than 0.1. You cannot configure a setting of 0 when there is only one backend attached to the backend service. Not available with backends that don't support using a balancingMode. This includes backends such as global internet NEGs, regional serverless NEGs, and PSC NEGs.

description String

An optional description of this resource. Provide this property when you create the resource.

failover Boolean

This field designates whether this is a failover backend. More than one failover backend can be configured for a given BackendService.

group String

The fully-qualified URL of an instance group or network endpoint group (NEG) resource. To determine what types of backends a load balancer supports, see the Backend services overview. You must use the fully-qualified URL (starting with https://www.googleapis.com/) to specify the instance group or NEG. Partial URLs are not supported.

maxConnections Number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerEndpoint Number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxConnectionsPerInstance Number

Defines a target maximum number of simultaneous connections. For usage guidelines, see Connection balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is RATE.

maxRate Number

Defines a maximum number of HTTP requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerEndpoint Number

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxRatePerInstance Number

Defines a maximum target for requests per second (RPS). For usage guidelines, see Rate balancing mode and Utilization balancing mode. Not available if the backend's balancingMode is CONNECTION.

maxUtilization Number

Optional parameter to define a target capacity for the UTILIZATION balancing mode. The valid range is [0.0, 1.0]. For usage guidelines, see Utilization balancing mode.

HeaderName string

The header field name to match on when bypassing cache. Values are case-insensitive.

HeaderName string

The header field name to match on when bypassing cache. Values are case-insensitive.

headerName String

The header field name to match on when bypassing cache. Values are case-insensitive.

headerName string

The header field name to match on when bypassing cache. Values are case-insensitive.

header_name str

The header field name to match on when bypassing cache. Values are case-insensitive.

headerName String

The header field name to match on when bypassing cache. Values are case-insensitive.

Code int

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

Ttl int

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

Code int

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

Ttl int

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

code Integer

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

ttl Integer

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

code number

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

ttl number

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

code int

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

ttl int

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

code Number

The HTTP status code to define a TTL against. Only HTTP status codes 300, 301, 302, 307, 308, 404, 405, 410, 421, 451 and 501 are can be specified as values, and you cannot specify a status code more than once.

ttl Number

The TTL (in seconds) for which to cache responses with the corresponding status code. The maximum allowed value is 1800s (30 minutes), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

BypassCacheOnRequestHeaders List<Pulumi.GoogleNative.Compute.V1.Inputs.BackendServiceCdnPolicyBypassCacheOnRequestHeaderResponse>

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

CacheKeyPolicy Pulumi.GoogleNative.Compute.V1.Inputs.CacheKeyPolicyResponse

The CacheKeyPolicy for this CdnPolicy.

CacheMode string

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

ClientTtl int

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

DefaultTtl int

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

MaxTtl int

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

NegativeCaching bool

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

NegativeCachingPolicy List<Pulumi.GoogleNative.Compute.V1.Inputs.BackendServiceCdnPolicyNegativeCachingPolicyResponse>

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

RequestCoalescing bool

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

ServeWhileStale int

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

SignedUrlCacheMaxAgeSec string

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

SignedUrlKeyNames List<string>

Names of the keys for signing request URLs.

BypassCacheOnRequestHeaders []BackendServiceCdnPolicyBypassCacheOnRequestHeaderResponse

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

CacheKeyPolicy CacheKeyPolicyResponse

The CacheKeyPolicy for this CdnPolicy.

CacheMode string

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

ClientTtl int

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

DefaultTtl int

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

MaxTtl int

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

NegativeCaching bool

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

NegativeCachingPolicy []BackendServiceCdnPolicyNegativeCachingPolicyResponse

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

RequestCoalescing bool

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

ServeWhileStale int

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

SignedUrlCacheMaxAgeSec string

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

SignedUrlKeyNames []string

Names of the keys for signing request URLs.

bypassCacheOnRequestHeaders List<BackendServiceCdnPolicyBypassCacheOnRequestHeaderResponse>

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

cacheKeyPolicy CacheKeyPolicyResponse

The CacheKeyPolicy for this CdnPolicy.

cacheMode String

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

clientTtl Integer

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

defaultTtl Integer

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

maxTtl Integer

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

negativeCaching Boolean

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

negativeCachingPolicy List<BackendServiceCdnPolicyNegativeCachingPolicyResponse>

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

requestCoalescing Boolean

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

serveWhileStale Integer

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

signedUrlCacheMaxAgeSec String

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

signedUrlKeyNames List<String>

Names of the keys for signing request URLs.

bypassCacheOnRequestHeaders BackendServiceCdnPolicyBypassCacheOnRequestHeaderResponse[]

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

cacheKeyPolicy CacheKeyPolicyResponse

The CacheKeyPolicy for this CdnPolicy.

cacheMode string

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

clientTtl number

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

defaultTtl number

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

maxTtl number

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

negativeCaching boolean

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

negativeCachingPolicy BackendServiceCdnPolicyNegativeCachingPolicyResponse[]

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

requestCoalescing boolean

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

serveWhileStale number

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

signedUrlCacheMaxAgeSec string

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

signedUrlKeyNames string[]

Names of the keys for signing request URLs.

bypass_cache_on_request_headers Sequence[BackendServiceCdnPolicyBypassCacheOnRequestHeaderResponse]

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

cache_key_policy CacheKeyPolicyResponse

The CacheKeyPolicy for this CdnPolicy.

cache_mode str

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

client_ttl int

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

default_ttl int

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

max_ttl int

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

negative_caching bool

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

negative_caching_policy Sequence[BackendServiceCdnPolicyNegativeCachingPolicyResponse]

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

request_coalescing bool

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

serve_while_stale int

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

signed_url_cache_max_age_sec str

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

signed_url_key_names Sequence[str]

Names of the keys for signing request URLs.

bypassCacheOnRequestHeaders List<Property Map>

Bypass the cache when the specified request headers are matched - e.g. Pragma or Authorization headers. Up to 5 headers can be specified. The cache is bypassed for all cdnPolicy.cacheMode settings.

cacheKeyPolicy Property Map

The CacheKeyPolicy for this CdnPolicy.

cacheMode String

Specifies the cache setting for all responses from this backend. The possible values are: USE_ORIGIN_HEADERS Requires the origin to set valid caching headers to cache content. Responses without these headers will not be cached at Google's edge, and will require a full trip to the origin on every request, potentially impacting performance and increasing load on the origin server. FORCE_CACHE_ALL Cache all content, ignoring any "private", "no-store" or "no-cache" directives in Cache-Control response headers. Warning: this may result in Cloud CDN caching private, per-user (user identifiable) content. CACHE_ALL_STATIC Automatically cache static content, including common image formats, media (video and audio), and web assets (JavaScript and CSS). Requests and responses that are marked as uncacheable, as well as dynamic content (including HTML), will not be cached.

clientTtl Number

Specifies a separate client (e.g. browser client) maximum TTL. This is used to clamp the max-age (or Expires) value sent to the client. With FORCE_CACHE_ALL, the lesser of client_ttl and default_ttl is used for the response max-age directive, along with a "public" directive. For cacheable content in CACHE_ALL_STATIC mode, client_ttl clamps the max-age from the origin (if specified), or else sets the response max-age directive to the lesser of the client_ttl and default_ttl, and also ensures a "public" cache-control directive is present. If a client TTL is not specified, a default value (1 hour) will be used. The maximum allowed value is 31,622,400s (1 year).

defaultTtl Number

Specifies the default TTL for cached content served by this origin for responses that do not have an existing valid TTL (max-age or s-max-age). Setting a TTL of "0" means "always revalidate". The value of defaultTTL cannot be set to a value greater than that of maxTTL, but can be equal. When the cacheMode is set to FORCE_CACHE_ALL, the defaultTTL will overwrite the TTL set in all responses. The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

maxTtl Number

Specifies the maximum allowed TTL for cached content served by this origin. Cache directives that attempt to set a max-age or s-maxage higher than this, or an Expires header more than maxTTL seconds in the future will be capped at the value of maxTTL, as if it were the value of an s-maxage Cache-Control directive. Headers sent to the client will not be modified. Setting a TTL of "0" means "always revalidate". The maximum allowed value is 31,622,400s (1 year), noting that infrequently accessed objects may be evicted from the cache before the defined TTL.

negativeCaching Boolean

Negative caching allows per-status code TTLs to be set, in order to apply fine-grained caching for common errors or redirects. This can reduce the load on your origin and improve end-user experience by reducing response latency. When the cache mode is set to CACHE_ALL_STATIC or USE_ORIGIN_HEADERS, negative caching applies to responses with the specified response code that lack any Cache-Control, Expires, or Pragma: no-cache directives. When the cache mode is set to FORCE_CACHE_ALL, negative caching applies to all responses with the specified response code, and override any caching headers. By default, Cloud CDN will apply the following default TTLs to these status codes: HTTP 300 (Multiple Choice), 301, 308 (Permanent Redirects): 10m HTTP 404 (Not Found), 410 (Gone), 451 (Unavailable For Legal Reasons): 120s HTTP 405 (Method Not Found), 421 (Misdirected Request), 501 (Not Implemented): 60s. These defaults can be overridden in negative_caching_policy.

negativeCachingPolicy List<Property Map>

Sets a cache TTL for the specified HTTP status code. negative_caching must be enabled to configure negative_caching_policy. Omitting the policy and leaving negative_caching enabled will use Cloud CDN's default cache TTLs. Note that when specifying an explicit negative_caching_policy, you should take care to specify a cache TTL for all response codes that you wish to cache. Cloud CDN will not apply any default negative caching when a policy exists.

requestCoalescing Boolean

If true then Cloud CDN will combine multiple concurrent cache fill requests into a small number of requests to the origin.

serveWhileStale Number

Serve existing content from the cache (if available) when revalidating content with the origin, or when an error is encountered when refreshing the cache. This setting defines the default "max-stale" duration for any cached responses that do not specify a max-stale directive. Stale responses that exceed the TTL configured here will not be served. The default limit (max-stale) is 86400s (1 day), which will allow stale content to be served up to this limit beyond the max-age (or s-max-age) of a cached response. The maximum allowed value is 604800 (1 week). Set this to zero (0) to disable serve-while-stale.

signedUrlCacheMaxAgeSec String

Maximum number of seconds the response to a signed URL request will be considered fresh. After this time period, the response will be revalidated before being served. Defaults to 1hr (3600s). When serving responses to signed URL requests, Cloud CDN will internally behave as though all responses from this backend had a "Cache-Control: public, max-age=[TTL]" header, regardless of any existing Cache-Control header. The actual headers served in responses will not be altered.

signedUrlKeyNames List<String>

Names of the keys for signing request URLs.

ConnectionPersistenceOnUnhealthyBackends string

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

EnableStrongAffinity bool

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

IdleTimeoutSec int

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

TrackingMode string

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

ConnectionPersistenceOnUnhealthyBackends string

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

EnableStrongAffinity bool

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

IdleTimeoutSec int

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

TrackingMode string

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

connectionPersistenceOnUnhealthyBackends String

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

enableStrongAffinity Boolean

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

idleTimeoutSec Integer

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

trackingMode String

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

connectionPersistenceOnUnhealthyBackends string

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

enableStrongAffinity boolean

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

idleTimeoutSec number

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

trackingMode string

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

connection_persistence_on_unhealthy_backends str

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

enable_strong_affinity bool

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

idle_timeout_sec int

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

tracking_mode str

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

connectionPersistenceOnUnhealthyBackends String

Specifies connection persistence when backends are unhealthy. The default value is DEFAULT_FOR_PROTOCOL. If set to DEFAULT_FOR_PROTOCOL, the existing connections persist on unhealthy backends only for connection-oriented protocols (TCP and SCTP) and only if the Tracking Mode is PER_CONNECTION (default tracking mode) or the Session Affinity is configured for 5-tuple. They do not persist for UDP. If set to NEVER_PERSIST, after a backend becomes unhealthy, the existing connections on the unhealthy backend are never persisted on the unhealthy backend. They are always diverted to newly selected healthy backends (unless all backends are unhealthy). If set to ALWAYS_PERSIST, existing connections always persist on unhealthy backends regardless of protocol and session affinity. It is generally not recommended to use this mode overriding the default. For more details, see Connection Persistence for Network Load Balancing and Connection Persistence for Internal TCP/UDP Load Balancing.

enableStrongAffinity Boolean

Enable Strong Session Affinity for Network Load Balancing. This option is not available publicly.

idleTimeoutSec Number

Specifies how long to keep a Connection Tracking entry while there is no matching traffic (in seconds). For Internal TCP/UDP Load Balancing: - The minimum (default) is 10 minutes and the maximum is 16 hours. - It can be set only if Connection Tracking is less than 5-tuple (i.e. Session Affinity is CLIENT_IP_NO_DESTINATION, CLIENT_IP or CLIENT_IP_PROTO, and Tracking Mode is PER_SESSION). For Network Load Balancer the default is 60 seconds. This option is not available publicly.

trackingMode String

Specifies the key used for connection tracking. There are two options: - PER_CONNECTION: This is the default mode. The Connection Tracking is performed as per the Connection Key (default Hash Method) for the specific protocol. - PER_SESSION: The Connection Tracking is performed as per the configured Session Affinity. It matches the configured Session Affinity. For more details, see Tracking Mode for Network Load Balancing and Tracking Mode for Internal TCP/UDP Load Balancing.

DisableConnectionDrainOnFailover bool

This can be set to true only if the protocol is TCP. The default is false.

DropTrafficIfUnhealthy bool

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

FailoverRatio double

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

DisableConnectionDrainOnFailover bool

This can be set to true only if the protocol is TCP. The default is false.

DropTrafficIfUnhealthy bool

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

FailoverRatio float64

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

disableConnectionDrainOnFailover Boolean

This can be set to true only if the protocol is TCP. The default is false.

dropTrafficIfUnhealthy Boolean

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

failoverRatio Double

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

disableConnectionDrainOnFailover boolean

This can be set to true only if the protocol is TCP. The default is false.

dropTrafficIfUnhealthy boolean

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

failoverRatio number

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

disable_connection_drain_on_failover bool

This can be set to true only if the protocol is TCP. The default is false.

drop_traffic_if_unhealthy bool

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

failover_ratio float

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

disableConnectionDrainOnFailover Boolean

This can be set to true only if the protocol is TCP. The default is false.

dropTrafficIfUnhealthy Boolean

If set to true, connections to the load balancer are dropped when all primary and all backup backend VMs are unhealthy.If set to false, connections are distributed among all primary VMs when all primary and all backup backend VMs are unhealthy. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing. The default is false.

failoverRatio Number

The value of the field must be in the range [0, 1]. If the value is 0, the load balancer performs a failover when the number of healthy primary VMs equals zero. For all other values, the load balancer performs a failover when the total number of healthy primary VMs is less than this ratio. For load balancers that have configurable failover: Internal TCP/UDP Load Balancing and external TCP/UDP Load Balancing.

Enabled bool

Whether the serving infrastructure will authenticate and authorize all incoming requests.

Oauth2ClientId string

OAuth2 client ID to use for the authentication flow.

Oauth2ClientSecret string

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

Oauth2ClientSecretSha256 string

SHA256 hash value for the field oauth2_client_secret above.

Enabled bool

Whether the serving infrastructure will authenticate and authorize all incoming requests.

Oauth2ClientId string

OAuth2 client ID to use for the authentication flow.

Oauth2ClientSecret string

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

Oauth2ClientSecretSha256 string

SHA256 hash value for the field oauth2_client_secret above.

enabled Boolean

Whether the serving infrastructure will authenticate and authorize all incoming requests.

oauth2ClientId String

OAuth2 client ID to use for the authentication flow.

oauth2ClientSecret String

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

oauth2ClientSecretSha256 String

SHA256 hash value for the field oauth2_client_secret above.

enabled boolean

Whether the serving infrastructure will authenticate and authorize all incoming requests.

oauth2ClientId string

OAuth2 client ID to use for the authentication flow.

oauth2ClientSecret string

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

oauth2ClientSecretSha256 string

SHA256 hash value for the field oauth2_client_secret above.

enabled bool

Whether the serving infrastructure will authenticate and authorize all incoming requests.

oauth2_client_id str

OAuth2 client ID to use for the authentication flow.

oauth2_client_secret str

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

oauth2_client_secret_sha256 str

SHA256 hash value for the field oauth2_client_secret above.

enabled Boolean

Whether the serving infrastructure will authenticate and authorize all incoming requests.

oauth2ClientId String

OAuth2 client ID to use for the authentication flow.

oauth2ClientSecret String

OAuth2 client secret to use for the authentication flow. For security reasons, this value cannot be retrieved via the API. Instead, the SHA-256 hash of the value is returned in the oauth2ClientSecretSha256 field. @InputOnly

oauth2ClientSecretSha256 String

SHA256 hash value for the field oauth2_client_secret above.

Data string

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

Name string

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

Data string

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

Name string

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

data String

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

name String

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

data string

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

name string

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

data str

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

name str

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

data String

An optional, arbitrary JSON object with configuration data, understood by a locally installed custom policy implementation.

name String

Identifies the custom policy. The value should match the name of a custom implementation registered on the gRPC clients. It should follow protocol buffer message naming conventions and include the full path (for example, myorg.CustomLbPolicy). The maximum length is 256 characters. Do not specify the same custom policy more than once for a backend. If you do, the configuration is rejected. For an example of how to use this field, see Use a custom policy.

Name string

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

Name string

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

name String

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

name string

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

name str

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

name String

The name of a locality load-balancing policy. Valid values include ROUND_ROBIN and, for Java clients, LEAST_REQUEST. For information about these values, see the description of localityLbPolicy. Do not specify the same policy more than once for a backend. If you do, the configuration is rejected.

CustomPolicy Pulumi.GoogleNative.Compute.V1.Inputs.BackendServiceLocalityLoadBalancingPolicyConfigCustomPolicyResponse

Policy Pulumi.GoogleNative.Compute.V1.Inputs.BackendServiceLocalityLoadBalancingPolicyConfigPolicyResponse

CustomPolicy BackendServiceLocalityLoadBalancingPolicyConfigCustomPolicyResponse

Policy BackendServiceLocalityLoadBalancingPolicyConfigPolicyResponse

customPolicy BackendServiceLocalityLoadBalancingPolicyConfigCustomPolicyResponse

policy BackendServiceLocalityLoadBalancingPolicyConfigPolicyResponse

customPolicy BackendServiceLocalityLoadBalancingPolicyConfigCustomPolicyResponse

policy BackendServiceLocalityLoadBalancingPolicyConfigPolicyResponse

custom_policy BackendServiceLocalityLoadBalancingPolicyConfigCustomPolicyResponse

policy BackendServiceLocalityLoadBalancingPolicyConfigPolicyResponse

customPolicy Property Map

policy Property Map

Enable bool

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

OptionalFields List<string>

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

OptionalMode string

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

SampleRate double

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

Enable bool

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

OptionalFields []string

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

OptionalMode string

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

SampleRate float64

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

enable Boolean

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

optionalFields List<String>

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

optionalMode String

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

sampleRate Double

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

enable boolean

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

optionalFields string[]

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

optionalMode string

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

sampleRate number

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

enable bool

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

optional_fields Sequence[str]

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

optional_mode str

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

sample_rate float

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

enable Boolean

Denotes whether to enable logging for the load balancer traffic served by this backend service. The default value is false.

optionalFields List<String>

This field can only be specified if logging is enabled for this backend service and "logConfig.optionalMode" was set to CUSTOM. Contains a list of optional fields you want to include in the logs. For example: serverInstance, serverGkeDetails.cluster, serverGkeDetails.pod.podNamespace

optionalMode String

This field can only be specified if logging is enabled for this backend service. Configures whether all, none or a subset of optional fields should be added to the reported logs. One of [INCLUDE_ALL_OPTIONAL, EXCLUDE_ALL_OPTIONAL, CUSTOM]. Default is EXCLUDE_ALL_OPTIONAL.

sampleRate Number

This field can only be specified if logging is enabled for this backend service. The value of the field must be in [0, 1]. This configures the sampling rate of requests to the load balancer where 1.0 means all logged requests are reported and 0.0 means no logged requests are reported. The default value is 1.0.

Reference string

Reference string

reference String

reference string

reference str

reference String

IncludeHost bool

If true, requests to different hosts will be cached separately.

IncludeHttpHeaders List<string>

Allows HTTP request headers (by name) to be used in the cache key.

IncludeNamedCookies List<string>

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

IncludeProtocol bool

If true, http and https requests will be cached separately.

IncludeQueryString bool

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

QueryStringBlacklist List<string>

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

QueryStringWhitelist List<string>

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

IncludeHost bool

If true, requests to different hosts will be cached separately.

IncludeHttpHeaders []string

Allows HTTP request headers (by name) to be used in the cache key.

IncludeNamedCookies []string

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

IncludeProtocol bool

If true, http and https requests will be cached separately.

IncludeQueryString bool

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

QueryStringBlacklist []string

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

QueryStringWhitelist []string

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

includeHost Boolean

If true, requests to different hosts will be cached separately.

includeHttpHeaders List<String>

Allows HTTP request headers (by name) to be used in the cache key.

includeNamedCookies List<String>

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

includeProtocol Boolean

If true, http and https requests will be cached separately.

includeQueryString Boolean

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

queryStringBlacklist List<String>

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

queryStringWhitelist List<String>

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

includeHost boolean

If true, requests to different hosts will be cached separately.

includeHttpHeaders string[]

Allows HTTP request headers (by name) to be used in the cache key.

includeNamedCookies string[]

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

includeProtocol boolean

If true, http and https requests will be cached separately.

includeQueryString boolean

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

queryStringBlacklist string[]

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

queryStringWhitelist string[]

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

include_host bool

If true, requests to different hosts will be cached separately.

include_http_headers Sequence[str]

Allows HTTP request headers (by name) to be used in the cache key.

include_named_cookies Sequence[str]

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

include_protocol bool

If true, http and https requests will be cached separately.

include_query_string bool

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

query_string_blacklist Sequence[str]

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

query_string_whitelist Sequence[str]

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

includeHost Boolean

If true, requests to different hosts will be cached separately.

includeHttpHeaders List<String>

Allows HTTP request headers (by name) to be used in the cache key.

includeNamedCookies List<String>

Allows HTTP cookies (by name) to be used in the cache key. The name=value pair will be used in the cache key Cloud CDN generates.

includeProtocol Boolean

If true, http and https requests will be cached separately.

includeQueryString Boolean

If true, include query string parameters in the cache key according to query_string_whitelist and query_string_blacklist. If neither is set, the entire query string will be included. If false, the query string will be excluded from the cache key entirely.

queryStringBlacklist List<String>

Names of query string parameters to exclude in cache keys. All other parameters will be included. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

queryStringWhitelist List<String>

Names of query string parameters to include in cache keys. All other parameters will be excluded. Either specify query_string_whitelist or query_string_blacklist, not both. '&' and '=' will be percent encoded and not treated as delimiters.

MaxConnections int

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxPendingRequests int

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxRequests int

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

MaxRequestsPerConnection int

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxRetries int

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxConnections int

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxPendingRequests int

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxRequests int

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

MaxRequestsPerConnection int

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

MaxRetries int

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxConnections Integer

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxPendingRequests Integer

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRequests Integer

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

maxRequestsPerConnection Integer

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRetries Integer

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxConnections number

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxPendingRequests number

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRequests number

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

maxRequestsPerConnection number

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRetries number

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

max_connections int

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

max_pending_requests int

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

max_requests int

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

max_requests_per_connection int

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

max_retries int

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxConnections Number

The maximum number of connections to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxPendingRequests Number

The maximum number of pending requests allowed to the backend service. If not specified, there is no limit. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRequests Number

The maximum number of parallel requests that allowed to the backend service. If not specified, there is no limit.

maxRequestsPerConnection Number

Maximum requests for a single connection to the backend service. This parameter is respected by both the HTTP/1.1 and HTTP/2 implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

maxRetries Number

The maximum number of parallel retries allowed to the backend cluster. If not specified, the default is 1. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

DrainingTimeoutSec int

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

DrainingTimeoutSec int

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

drainingTimeoutSec Integer

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

drainingTimeoutSec number

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

draining_timeout_sec int

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

drainingTimeoutSec Number

Configures a duration timeout for existing requests on a removed backend instance. For supported load balancers and protocols, as described in Enabling connection draining.

Name string

Name of the cookie.

Path string

Path to set for the cookie.

Ttl Pulumi.GoogleNative.Compute.V1.Inputs.DurationResponse

Lifetime of the cookie.

Name string

Name of the cookie.

Path string

Path to set for the cookie.

Ttl DurationResponse

Lifetime of the cookie.

name String

Name of the cookie.

path String

Path to set for the cookie.

ttl DurationResponse

Lifetime of the cookie.

name string

Name of the cookie.

path string

Path to set for the cookie.

ttl DurationResponse

Lifetime of the cookie.

name str

Name of the cookie.

path str

Path to set for the cookie.

ttl DurationResponse

Lifetime of the cookie.

name String

Name of the cookie.

path String

Path to set for the cookie.

ttl Property Map

Lifetime of the cookie.

HttpCookie Pulumi.GoogleNative.Compute.V1.Inputs.ConsistentHashLoadBalancerSettingsHttpCookieResponse

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

HttpHeaderName string

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

MinimumRingSize string

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

HttpCookie ConsistentHashLoadBalancerSettingsHttpCookieResponse

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

HttpHeaderName string

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

MinimumRingSize string

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

httpCookie ConsistentHashLoadBalancerSettingsHttpCookieResponse

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

httpHeaderName String

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

minimumRingSize String

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

httpCookie ConsistentHashLoadBalancerSettingsHttpCookieResponse

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

httpHeaderName string

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

minimumRingSize string

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

http_cookie ConsistentHashLoadBalancerSettingsHttpCookieResponse

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

http_header_name str

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

minimum_ring_size str

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

httpCookie Property Map

Hash is based on HTTP Cookie. This field describes a HTTP cookie that will be used as the hash key for the consistent hash load balancer. If the cookie is not present, it will be generated. This field is applicable if the sessionAffinity is set to HTTP_COOKIE. Not supported when the backend service is referenced by a URL map that is bound to target gRPC proxy that has validateForProxyless field set to true.

httpHeaderName String

The hash based on the value of the specified header field. This field is applicable if the sessionAffinity is set to HEADER_FIELD.

minimumRingSize String

The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.

Nanos int

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

Nanos int

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Integer

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos number

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos int

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Number

Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String

Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

BaseEjectionTime Pulumi.GoogleNative.Compute.V1.Inputs.DurationResponse

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

ConsecutiveErrors int

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

ConsecutiveGatewayFailure int

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

EnforcingConsecutiveErrors int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

EnforcingConsecutiveGatewayFailure int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

EnforcingSuccessRate int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

Interval Pulumi.GoogleNative.Compute.V1.Inputs.DurationResponse

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

MaxEjectionPercent int

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

SuccessRateMinimumHosts int

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

SuccessRateRequestVolume int

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

SuccessRateStdevFactor int

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

BaseEjectionTime DurationResponse

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

ConsecutiveErrors int

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

ConsecutiveGatewayFailure int

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

EnforcingConsecutiveErrors int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

EnforcingConsecutiveGatewayFailure int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

EnforcingSuccessRate int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

Interval DurationResponse

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

MaxEjectionPercent int

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

SuccessRateMinimumHosts int

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

SuccessRateRequestVolume int

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

SuccessRateStdevFactor int

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

baseEjectionTime DurationResponse

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

consecutiveErrors Integer

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

consecutiveGatewayFailure Integer

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

enforcingConsecutiveErrors Integer

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

enforcingConsecutiveGatewayFailure Integer

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

enforcingSuccessRate Integer

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

interval DurationResponse

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

maxEjectionPercent Integer

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

successRateMinimumHosts Integer

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

successRateRequestVolume Integer

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

successRateStdevFactor Integer

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

baseEjectionTime DurationResponse

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

consecutiveErrors number

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

consecutiveGatewayFailure number

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

enforcingConsecutiveErrors number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

enforcingConsecutiveGatewayFailure number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

enforcingSuccessRate number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

interval DurationResponse

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

maxEjectionPercent number

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

successRateMinimumHosts number

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

successRateRequestVolume number

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

successRateStdevFactor number

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

base_ejection_time DurationResponse

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

consecutive_errors int

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

consecutive_gateway_failure int

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

enforcing_consecutive_errors int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

enforcing_consecutive_gateway_failure int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

enforcing_success_rate int

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

interval DurationResponse

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

max_ejection_percent int

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

success_rate_minimum_hosts int

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

success_rate_request_volume int

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

success_rate_stdev_factor int

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

baseEjectionTime Property Map

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

consecutiveErrors Number

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

consecutiveGatewayFailure Number

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

enforcingConsecutiveErrors Number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

enforcingConsecutiveGatewayFailure Number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

enforcingSuccessRate Number

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

interval Property Map

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

maxEjectionPercent Number

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

successRateMinimumHosts Number

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

successRateRequestVolume Number

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

successRateStdevFactor Number

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

AwsV4Authentication Pulumi.GoogleNative.Compute.V1.Inputs.AWSV4SignatureResponse

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

ClientTlsPolicy string

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

SubjectAltNames List<string>

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

AwsV4Authentication AWSV4SignatureResponse

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

ClientTlsPolicy string

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

SubjectAltNames []string

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

awsV4Authentication AWSV4SignatureResponse

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

clientTlsPolicy String

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

subjectAltNames List<String>

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

awsV4Authentication AWSV4SignatureResponse

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

clientTlsPolicy string

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

subjectAltNames string[]

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

aws_v4_authentication AWSV4SignatureResponse

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

client_tls_policy str

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

subject_alt_names Sequence[str]

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

awsV4Authentication Property Map

The configuration needed to generate a signature for access to private storage buckets that support AWS's Signature Version 4 for authentication. Allowed only for INTERNET_IP_PORT and INTERNET_FQDN_PORT NEG backends.

clientTlsPolicy String

Optional. A URL referring to a networksecurity.ClientTlsPolicy resource that describes how clients should authenticate with this service's backends. clientTlsPolicy only applies to a global BackendService with the loadBalancingScheme set to INTERNAL_SELF_MANAGED. If left blank, communications are not encrypted.

subjectAltNames List<String>

Optional. A list of Subject Alternative Names (SANs) that the client verifies during a mutual TLS handshake with an server/endpoint for this BackendService. When the server presents its X.509 certificate to the client, the client inspects the certificate's subjectAltName field. If the field contains one of the specified values, the communication continues. Otherwise, it fails. This additional check enables the client to verify that the server is authorized to run the requested service. Note that the contents of the server certificate's subjectAltName field are configured by the Public Key Infrastructure which provisions server identities. Only applies to a global BackendService with loadBalancingScheme set to INTERNAL_SELF_MANAGED. Only applies when BackendService has an attached clientTlsPolicy with clientCertificate (mTLS mode).

Policy string

Policy string

policy String

policy string

policy str

policy String