google-native.cloudtasks/v2beta3.getQueue

func LookupQueue(ctx *Context, args *LookupQueueArgs, opts ...InvokeOption) (*LookupQueueResult, error)
func LookupQueueOutput(ctx *Context, args *LookupQueueOutputArgs, opts ...InvokeOption) LookupQueueResultOutput

> Note: This function is named LookupQueue in the Go SDK.

Location string

QueueId string

Project string

ReadMask string

Location string

QueueId string

Project string

ReadMask string

location String

queueId String

project String

readMask String

location string

queueId string

project string

readMask string

location str

queue_id str

project str

read_mask str

location String

queueId String

project String

readMask String

AppEngineHttpQueue Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.AppEngineHttpQueueResponse

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

HttpTarget Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.HttpTargetResponse

Modifies HTTP target for HTTP tasks.

Name string

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

PurgeTime string

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

RateLimits Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.RateLimitsResponse

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

RetryConfig Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.RetryConfigResponse

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

StackdriverLoggingConfig Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.StackdriverLoggingConfigResponse

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

State string

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

Stats Pulumi.GoogleNative.CloudTasks.V2Beta3.Outputs.QueueStatsResponse

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

TaskTtl string

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

TombstoneTtl string

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

Type string

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

AppEngineHttpQueue AppEngineHttpQueueResponse

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

HttpTarget HttpTargetResponse

Modifies HTTP target for HTTP tasks.

Name string

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

PurgeTime string

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

RateLimits RateLimitsResponse

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

RetryConfig RetryConfigResponse

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

StackdriverLoggingConfig StackdriverLoggingConfigResponse

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

State string

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

Stats QueueStatsResponse

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

TaskTtl string

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

TombstoneTtl string

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

Type string

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

appEngineHttpQueue AppEngineHttpQueueResponse

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

httpTarget HttpTargetResponse

Modifies HTTP target for HTTP tasks.

name String

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

purgeTime String

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

rateLimits RateLimitsResponse

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

retryConfig RetryConfigResponse

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

stackdriverLoggingConfig StackdriverLoggingConfigResponse

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

state String

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

stats QueueStatsResponse

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

taskTtl String

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

tombstoneTtl String

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

type String

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

appEngineHttpQueue AppEngineHttpQueueResponse

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

httpTarget HttpTargetResponse

Modifies HTTP target for HTTP tasks.

name string

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

purgeTime string

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

rateLimits RateLimitsResponse

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

retryConfig RetryConfigResponse

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

stackdriverLoggingConfig StackdriverLoggingConfigResponse

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

state string

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

stats QueueStatsResponse

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

taskTtl string

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

tombstoneTtl string

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

type string

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

app_engine_http_queue AppEngineHttpQueueResponse

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

http_target HttpTargetResponse

Modifies HTTP target for HTTP tasks.

name str

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

purge_time str

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

rate_limits RateLimitsResponse

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

retry_config RetryConfigResponse

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

stackdriver_logging_config StackdriverLoggingConfigResponse

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

state str

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

stats QueueStatsResponse

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

task_ttl str

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

tombstone_ttl str

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

type str

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

appEngineHttpQueue Property Map

AppEngineHttpQueue settings apply only to App Engine tasks in this queue. Http tasks are not affected by this proto.

httpTarget Property Map

Modifies HTTP target for HTTP tasks.

name String

Caller-specified and required in CreateQueue, after which it becomes output only. The queue name. The queue name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the queue's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters.

purgeTime String

The last time this queue was purged. All tasks that were created before this time were purged. A queue can be purged using PurgeQueue, the App Engine Task Queue SDK, or the Cloud Console. Purge time will be truncated to the nearest microsecond. Purge time will be unset if the queue has never been purged.

rateLimits Property Map

Rate limits for task dispatches. rate_limits and retry_config are related because they both control task attempts. However they control task attempts in different ways: * rate_limits controls the total rate of dispatches from a queue (i.e. all traffic dispatched from the queue, regardless of whether the dispatch is from a first attempt or a retry). * retry_config controls what happens to particular a task after its first attempt fails. That is, retry_config controls task retries (the second attempt, third attempt, etc). The queue's actual dispatch rate is the result of: * Number of tasks in the queue * User-specified throttling: rate_limits, retry_config, and the queue's state. * System throttling due to 429 (Too Many Requests) or 503 (Service Unavailable) responses from the worker, high error rates, or to smooth sudden large traffic spikes.

retryConfig Property Map

Settings that determine the retry behavior. * For tasks created using Cloud Tasks: the queue-level retry settings apply to all tasks in the queue that were created using Cloud Tasks. Retry settings cannot be set on individual tasks. * For tasks created using the App Engine SDK: the queue-level retry settings apply to all tasks in the queue which do not have retry settings explicitly set on the task and were created by the App Engine SDK. See App Engine documentation.

stackdriverLoggingConfig Property Map

Configuration options for writing logs to Stackdriver Logging. If this field is unset, then no logs are written.

state String

The state of the queue. state can only be changed by called PauseQueue, ResumeQueue, or uploading queue.yaml/xml. UpdateQueue cannot be used to change state.

stats Property Map

The realtime, informational statistics for a queue. In order to receive the statistics the caller should include this field in the FieldMask.

taskTtl String

The maximum amount of time that a task will be retained in this queue. After a task has lived for task_ttl, the task will be deleted regardless of whether it was dispatched or not. The minimum value is 10 days. The maximum value is 10 years. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default task_ttl of 31 days. . Queues created by queue.yaml/xml have a fixed task_ttl of the maximum duration, because there is a storage quota for these queues.

tombstoneTtl String

The task tombstone time to live (TTL). After a task is deleted or executed, the task's tombstone is retained for the length of time specified by tombstone_ttl. The tombstone is used by task de-duplication; another task with the same name can't be created until the tombstone has expired. For more information about task de-duplication, see the documentation for CreateTaskRequest. The minimum value is 1 hour. The maximum value is 9 days. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. Queues created by Cloud Tasks have a default tombstone_ttl of 1 hour.

type String

Immutable. The type of a queue (push or pull). Queue.type is an immutable property of the queue that is set at the queue creation time. When left unspecified, the default value of PUSH is selected.

AppEngineRoutingOverride Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.AppEngineRoutingResponse

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

AppEngineRoutingOverride AppEngineRoutingResponse

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

appEngineRoutingOverride AppEngineRoutingResponse

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

appEngineRoutingOverride AppEngineRoutingResponse

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

app_engine_routing_override AppEngineRoutingResponse

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

appEngineRoutingOverride Property Map

Overrides for the task-level app_engine_routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

Host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

Instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

Service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

Instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

Service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host String

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance String

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service String

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version String

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host str

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance str

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service str

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version str

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host String

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance String

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service String

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version String

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Header Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.HeaderResponse

header embodying a key and a value.

Header HeaderResponse

header embodying a key and a value.

header HeaderResponse

header embodying a key and a value.

header HeaderResponse

header embodying a key and a value.

header HeaderResponse

header embodying a key and a value.

header Property Map

header embodying a key and a value.

Key string

The Key of the header.

Value string

The Value of the header.

Key string

The Key of the header.

Value string

The Value of the header.

key String

The Key of the header.

value String

The Value of the header.

key string

The Key of the header.

value string

The Value of the header.

key str

The Key of the header.

value str

The Value of the header.

key String

The Key of the header.

value String

The Value of the header.

HeaderOverrides List<Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.HeaderOverrideResponse>

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

HttpMethod string

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

OauthToken Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.OAuthTokenResponse

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

OidcToken Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

UriOverride Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.UriOverrideResponse

URI override. When specified, overrides the execution URI for all the tasks in the queue.

HeaderOverrides []HeaderOverrideResponse

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

HttpMethod string

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

OauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

OidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

UriOverride UriOverrideResponse

URI override. When specified, overrides the execution URI for all the tasks in the queue.

headerOverrides List<HeaderOverrideResponse>

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

httpMethod String

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

oauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

uriOverride UriOverrideResponse

URI override. When specified, overrides the execution URI for all the tasks in the queue.

headerOverrides HeaderOverrideResponse[]

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

httpMethod string

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

oauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

uriOverride UriOverrideResponse

URI override. When specified, overrides the execution URI for all the tasks in the queue.

header_overrides Sequence[HeaderOverrideResponse]

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

http_method str

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

oauth_token OAuthTokenResponse

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidc_token OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

uri_override UriOverrideResponse

URI override. When specified, overrides the execution URI for all the tasks in the queue.

headerOverrides List<Property Map>

HTTP target headers. This map contains the header field names and values. Headers will be set when running the CreateTask and/or BufferTask. These headers represent a subset of the headers that will be configured for the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Several predefined headers, prefixed with "X-CloudTasks-", can be used to define properties of the task. * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example,Content-Type can be set to "application/octet-stream" or "application/json". The default value is set to "application/json". * User-Agent: This will be set to "Google-Cloud-Tasks". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB. Queue-level headers to override headers of all the tasks in the queue.

httpMethod String

The HTTP method to use for the request. When specified, it overrides HttpRequest for the task. Note that if the value is set to HttpMethod the HttpRequest of the task will be ignored at execution time.

oauthToken Property Map

If specified, an OAuth token will be generated and attached as the Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken Property Map

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

uriOverride Property Map

URI override. When specified, overrides the execution URI for all the tasks in the queue.

Scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

ServiceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

ServiceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope String

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail String

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope str

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

service_account_email str

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope String

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail String

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

ServiceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

ServiceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience String

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail String

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience str

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

service_account_email str

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience String

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail String

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Path string

The URI path (e.g., /users/1234). Default is an empty string.

Path string

The URI path (e.g., /users/1234). Default is an empty string.

path String

The URI path (e.g., /users/1234). Default is an empty string.

path string

The URI path (e.g., /users/1234). Default is an empty string.

path str

The URI path (e.g., /users/1234). Default is an empty string.

path String

The URI path (e.g., /users/1234). Default is an empty string.

QueryParams string

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

QueryParams string

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

queryParams String

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

queryParams string

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

query_params str

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

queryParams String

The query parameters (e.g., qparam1=123&qparam2=456). Default is an empty string.

ConcurrentDispatchesCount string

The number of requests that the queue has dispatched but has not received a reply for yet.

EffectiveExecutionRate double

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

ExecutedLastMinuteCount string

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

OldestEstimatedArrivalTime string

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

TasksCount string

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

ConcurrentDispatchesCount string

The number of requests that the queue has dispatched but has not received a reply for yet.

EffectiveExecutionRate float64

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

ExecutedLastMinuteCount string

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

OldestEstimatedArrivalTime string

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

TasksCount string

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

concurrentDispatchesCount String

The number of requests that the queue has dispatched but has not received a reply for yet.

effectiveExecutionRate Double

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

executedLastMinuteCount String

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

oldestEstimatedArrivalTime String

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

tasksCount String

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

concurrentDispatchesCount string

The number of requests that the queue has dispatched but has not received a reply for yet.

effectiveExecutionRate number

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

executedLastMinuteCount string

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

oldestEstimatedArrivalTime string

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

tasksCount string

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

concurrent_dispatches_count str

The number of requests that the queue has dispatched but has not received a reply for yet.

effective_execution_rate float

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

executed_last_minute_count str

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

oldest_estimated_arrival_time str

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

tasks_count str

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

concurrentDispatchesCount String

The number of requests that the queue has dispatched but has not received a reply for yet.

effectiveExecutionRate Number

The current maximum number of tasks per second executed by the queue. The maximum value of this variable is controlled by the RateLimits of the Queue. However, this value could be less to avoid overloading the endpoints tasks in the queue are targeting.

executedLastMinuteCount String

The number of tasks that the queue has dispatched and received a reply for during the last minute. This variable counts both successful and non-successful executions.

oldestEstimatedArrivalTime String

An estimation of the nearest time in the future where a task in the queue is scheduled to be executed.

tasksCount String

An estimation of the number of tasks in the queue, that is, the tasks in the queue that haven't been executed, the tasks in the queue which the queue has dispatched but has not yet received a reply for, and the failed tasks that the queue is retrying.

MaxBurstSize int

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

MaxConcurrentDispatches int

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

MaxDispatchesPerSecond double

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

MaxBurstSize int

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

MaxConcurrentDispatches int

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

MaxDispatchesPerSecond float64

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

maxBurstSize Integer

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

maxConcurrentDispatches Integer

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

maxDispatchesPerSecond Double

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

maxBurstSize number

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

maxConcurrentDispatches number

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

maxDispatchesPerSecond number

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

max_burst_size int

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

max_concurrent_dispatches int

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

max_dispatches_per_second float

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

maxBurstSize Number

The max burst size. Max burst size limits how fast tasks in queue are processed when many tasks are in the queue and the rate is high. This field allows the queue to have a high rate so processing starts shortly after a task is enqueued, but still limits resource usage when many tasks are enqueued in a short period of time. The token bucket algorithm is used to control the rate of task dispatches. Each queue has a token bucket that holds tokens, up to the maximum specified by max_burst_size. Each time a task is dispatched, a token is removed from the bucket. Tasks will be dispatched until the queue's bucket runs out of tokens. The bucket will be continuously refilled with new tokens based on max_dispatches_per_second. The default value of max_burst_size is picked by Cloud Tasks based on the value of max_dispatches_per_second. The maximum value of max_burst_size is 500. For App Engine queues that were created or updated using queue.yaml/xml, max_burst_size is equal to bucket_size. If UpdateQueue is called on a queue without explicitly setting a value for max_burst_size, max_burst_size value will get updated if UpdateQueue is updating max_dispatches_per_second.

maxConcurrentDispatches Number

The maximum number of concurrent tasks that Cloud Tasks allows to be dispatched for this queue. After this threshold has been reached, Cloud Tasks stops dispatching tasks until the number of concurrent requests decreases. If unspecified when the queue is created, Cloud Tasks will pick the default. The maximum allowed value is 5,000. This field has the same meaning as max_concurrent_requests in queue.yaml/xml.

maxDispatchesPerSecond Number

The maximum rate at which tasks are dispatched from this queue. If unspecified when the queue is created, Cloud Tasks will pick the default. * For App Engine queues, the maximum allowed value is 500. This field has the same meaning as rate in queue.yaml/xml.

MaxAttempts int

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

MaxBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

MaxDoublings int

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

MaxRetryDuration string

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

MinBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

MaxAttempts int

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

MaxBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

MaxDoublings int

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

MaxRetryDuration string

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

MinBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

maxAttempts Integer

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

maxBackoff String

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

maxDoublings Integer

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

maxRetryDuration String

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

minBackoff String

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

maxAttempts number

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

maxBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

maxDoublings number

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

maxRetryDuration string

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

minBackoff string

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

max_attempts int

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

max_backoff str

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

max_doublings int

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

max_retry_duration str

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

min_backoff str

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

maxAttempts Number

Number of attempts per task. Cloud Tasks will attempt the task max_attempts times (that is, if the first attempt fails, then there will be max_attempts - 1 retries). Must be >= -1. If unspecified when the queue is created, Cloud Tasks will pick the default. -1 indicates unlimited attempts. This field has the same meaning as task_retry_limit in queue.yaml/xml.

maxBackoff String

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. max_backoff will be truncated to the nearest second. This field has the same meaning as max_backoff_seconds in queue.yaml/xml.

maxDoublings Number

The time between retries will double max_doublings times. A task's retry interval starts at min_backoff, then doubles max_doublings times, then increases linearly, and finally retries at intervals of max_backoff up to max_attempts times. For example, if min_backoff is 10s, max_backoff is 300s, and max_doublings is 3, then the a task will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the task will retry at intervals of max_backoff until the task has been attempted max_attempts times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, .... If unspecified when the queue is created, Cloud Tasks will pick the default. This field has the same meaning as max_doublings in queue.yaml/xml.

maxRetryDuration String

If positive, max_retry_duration specifies the time limit for retrying a failed task, measured from when the task was first attempted. Once max_retry_duration time has passed and the task has been attempted max_attempts times, no further attempts will be made and the task will be deleted. If zero, then the task age is unlimited. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For the maximum possible value or the format, see the documentation for Duration. max_retry_duration will be truncated to the nearest second. This field has the same meaning as task_age_limit in queue.yaml/xml.

minBackoff String

A task will be scheduled for retry between min_backoff and max_backoff duration after it fails, if the queue's RetryConfig specifies that the task should be retried. If unspecified when the queue is created, Cloud Tasks will pick the default. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. min_backoff will be truncated to the nearest second. This field has the same meaning as min_backoff_seconds in queue.yaml/xml.

SamplingRatio double

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

SamplingRatio float64

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

samplingRatio Double

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

samplingRatio number

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

sampling_ratio float

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

samplingRatio Number

Specifies the fraction of operations to write to Stackdriver Logging. This field may contain any value between 0.0 and 1.0, inclusive. 0.0 is the default and means that no operations are logged.

Host string

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

PathOverride Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.PathOverrideResponse

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

Port string

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

QueryOverride Pulumi.GoogleNative.CloudTasks.V2Beta3.Inputs.QueryOverrideResponse

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

Scheme string

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

UriOverrideEnforceMode string

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.

Host string

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

PathOverride PathOverrideResponse

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

Port string

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

QueryOverride QueryOverrideResponse

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

Scheme string

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

UriOverrideEnforceMode string

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.

host String

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

pathOverride PathOverrideResponse

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

port String

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

queryOverride QueryOverrideResponse

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

scheme String

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

uriOverrideEnforceMode String

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.

host string

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

pathOverride PathOverrideResponse

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

port string

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

queryOverride QueryOverrideResponse

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

scheme string

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

uriOverrideEnforceMode string

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.

host str

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

path_override PathOverrideResponse

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

port str

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

query_override QueryOverrideResponse

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

scheme str

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

uri_override_enforce_mode str

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.

host String

Host override. When specified, replaces the host part of the task URL. For example, if the task URL is "https://www.google.com," and host value is set to "example.net", the overridden URI will be changed to "https://example.net." Host value cannot be an empty string (INVALID_ARGUMENT).

pathOverride Property Map

URI path. When specified, replaces the existing path of the task URL. Setting the path value to an empty string clears the URI path segment.

port String

Port override. When specified, replaces the port part of the task URI. For instance, for a URI http://www.google.com/foo and port=123, the overridden URI becomes http://www.google.com:123/foo. Note that the port value must be a positive integer. Setting the port to 0 (Zero) clears the URI port.

queryOverride Property Map

URI Query. When specified, replaces the query part of the task URI. Setting the query value to an empty string clears the URI query segment.

scheme String

Scheme override. When specified, the task URI scheme is replaced by the provided value (HTTP or HTTPS).

uriOverrideEnforceMode String

URI Override Enforce Mode When specified, determines the Target UriOverride mode. If not specified, it defaults to ALWAYS.