google-native.cloudtasks/v2.getTask

func LookupTask(ctx *Context, args *LookupTaskArgs, opts ...InvokeOption) (*LookupTaskResult, error)
func LookupTaskOutput(ctx *Context, args *LookupTaskOutputArgs, opts ...InvokeOption) LookupTaskResultOutput

> Note: This function is named LookupTask in the Go SDK.

Location string

QueueId string

TaskId string

Project string

ResponseView string

Location string

QueueId string

TaskId string

Project string

ResponseView string

location String

queueId String

taskId String

project String

responseView String

location string

queueId string

taskId string

project string

responseView string

location str

queue_id str

task_id str

project str

response_view str

location String

queueId String

taskId String

project String

responseView String

AppEngineHttpRequest Pulumi.GoogleNative.CloudTasks.V2.Outputs.AppEngineHttpRequestResponse

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

CreateTime string

The time that the task was created. create_time will be truncated to the nearest second.

DispatchCount int

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

DispatchDeadline string

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

FirstAttempt Pulumi.GoogleNative.CloudTasks.V2.Outputs.AttemptResponse

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

HttpRequest Pulumi.GoogleNative.CloudTasks.V2.Outputs.HttpRequestResponse

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

LastAttempt Pulumi.GoogleNative.CloudTasks.V2.Outputs.AttemptResponse

The status of the task's last attempt.

Name string

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

ResponseCount int

The number of attempts which have received a response.

ScheduleTime string

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

View string

The view specifies which subset of the Task has been returned.

AppEngineHttpRequest AppEngineHttpRequestResponse

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

CreateTime string

The time that the task was created. create_time will be truncated to the nearest second.

DispatchCount int

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

DispatchDeadline string

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

FirstAttempt AttemptResponse

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

HttpRequest HttpRequestResponse

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

LastAttempt AttemptResponse

The status of the task's last attempt.

Name string

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

ResponseCount int

The number of attempts which have received a response.

ScheduleTime string

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

View string

The view specifies which subset of the Task has been returned.

appEngineHttpRequest AppEngineHttpRequestResponse

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

createTime String

The time that the task was created. create_time will be truncated to the nearest second.

dispatchCount Integer

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

dispatchDeadline String

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

firstAttempt AttemptResponse

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

httpRequest HttpRequestResponse

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

lastAttempt AttemptResponse

The status of the task's last attempt.

name String

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

responseCount Integer

The number of attempts which have received a response.

scheduleTime String

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

view String

The view specifies which subset of the Task has been returned.

appEngineHttpRequest AppEngineHttpRequestResponse

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

createTime string

The time that the task was created. create_time will be truncated to the nearest second.

dispatchCount number

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

dispatchDeadline string

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

firstAttempt AttemptResponse

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

httpRequest HttpRequestResponse

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

lastAttempt AttemptResponse

The status of the task's last attempt.

name string

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

responseCount number

The number of attempts which have received a response.

scheduleTime string

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

view string

The view specifies which subset of the Task has been returned.

app_engine_http_request AppEngineHttpRequestResponse

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

create_time str

The time that the task was created. create_time will be truncated to the nearest second.

dispatch_count int

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

dispatch_deadline str

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

first_attempt AttemptResponse

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

http_request HttpRequestResponse

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

last_attempt AttemptResponse

The status of the task's last attempt.

name str

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

response_count int

The number of attempts which have received a response.

schedule_time str

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

view str

The view specifies which subset of the Task has been returned.

appEngineHttpRequest Property Map

HTTP request that is sent to the App Engine app handler. An App Engine task is a task that has AppEngineHttpRequest set.

createTime String

The time that the task was created. create_time will be truncated to the nearest second.

dispatchCount Number

The number of attempts dispatched. This count includes attempts which have been dispatched but haven't received a response.

dispatchDeadline String

The deadline for requests sent to the worker. If the worker does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. Cloud Tasks will retry the task according to the RetryConfig. Note that when the request is cancelled, Cloud Tasks will stop listening for the response, but whether the worker stops processing depends on the worker. For example, if the worker is stuck, it may not react to cancelled requests. The default and maximum values depend on the type of request: * For HTTP tasks, the default is 10 minutes. The deadline must be in the interval [15 seconds, 30 minutes]. * For App Engine tasks, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds]. Regardless of the task's dispatch_deadline, the app handler will not run for longer than than the service's timeout. We recommend setting the dispatch_deadline to at most a few seconds more than the app handler's timeout. For more information see Timeouts. The value must be given as a string that indicates the length of time (in seconds) followed by s (for "seconds"). For more information on the format, see the documentation for Duration. dispatch_deadline will be truncated to the nearest millisecond. The deadline is an approximate deadline.

firstAttempt Property Map

The status of the task's first attempt. Only dispatch_time will be set. The other Attempt information is not retained by Cloud Tasks.

httpRequest Property Map

HTTP request that is sent to the worker. An HTTP task is a task that has HttpRequest set.

lastAttempt Property Map

The status of the task's last attempt.

name String

Optionally caller-specified in CreateTask. The task name. The task name must have the following format: projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID * PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects * LOCATION_ID is the canonical ID for the task's location. The list of available locations can be obtained by calling ListLocations. For more information, see https://cloud.google.com/about/locations/. * QUEUE_ID can contain letters ([A-Za-z]), numbers ([0-9]), or hyphens (-). The maximum length is 100 characters. * TASK_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

responseCount Number

The number of attempts which have received a response.

scheduleTime String

The time when the task is scheduled to be attempted or retried. schedule_time will be truncated to the nearest microsecond.

view String

The view specifies which subset of the Task has been returned.

AppEngineRouting Pulumi.GoogleNative.CloudTasks.V2.Inputs.AppEngineRoutingResponse

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

Body string

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

Headers Dictionary<string, string>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

HttpMethod string

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

RelativeUri string

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

AppEngineRouting AppEngineRoutingResponse

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

Body string

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

Headers map[string]string

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

HttpMethod string

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

RelativeUri string

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

appEngineRouting AppEngineRoutingResponse

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

body String

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

headers Map<String,String>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

httpMethod String

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

relativeUri String

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

appEngineRouting AppEngineRoutingResponse

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

body string

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

headers {[key: string]: string}

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

httpMethod string

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

relativeUri string

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

app_engine_routing AppEngineRoutingResponse

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

body str

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

headers Mapping[str, str]

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

http_method str

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

relative_uri str

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

appEngineRouting Property Map

Task-level setting for App Engine routing. * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

body String

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It is an error to set a body on a task with an incompatible HttpMethod.

headers Map<String>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values: * User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a body, Cloud Tasks sets the following headers: * Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json". * Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden: * Host * X-Google-* * X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

httpMethod String

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

relativeUri String

The relative URI. The relative URI must begin with "/" and must be a valid HTTP relative URI. It can contain a path and query string arguments. If the relative URI is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

Host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

Instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

Service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

Instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

Service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

Version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host String

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance String

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service String

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version String

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host string

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance string

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service string

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version string

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host str

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance str

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service str

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version str

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

host String

The host that the task is sent to. The host is constructed from the domain name of the app associated with the queue's project ID (for example .appspot.com), and the service, version, and instance. Tasks which were created using the App Engine SDK might have a custom domain name. For more information, see How Requests are Routed.

instance String

App instance. By default, the task is sent to an instance which is available when the task is attempted. Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

service String

App service. By default, the task is sent to the service which is the default service when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

version String

App version. By default, the task is sent to the version which is the default version when the task is attempted. For some queues or tasks which were created using the App Engine Task Queue API, host is not parsable into service, version, and instance. For example, some tasks which were created using the App Engine SDK use a custom domain name; custom domains are not parsed by Cloud Tasks. If host is not parsable, then service, version, and instance are the empty string.

DispatchTime string

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

ResponseStatus Pulumi.GoogleNative.CloudTasks.V2.Inputs.StatusResponse

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

ResponseTime string

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

ScheduleTime string

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

DispatchTime string

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

ResponseStatus StatusResponse

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

ResponseTime string

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

ScheduleTime string

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

dispatchTime String

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

responseStatus StatusResponse

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

responseTime String

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

scheduleTime String

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

dispatchTime string

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

responseStatus StatusResponse

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

responseTime string

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

scheduleTime string

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

dispatch_time str

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

response_status StatusResponse

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

response_time str

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

schedule_time str

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

dispatchTime String

The time that this attempt was dispatched. dispatch_time will be truncated to the nearest microsecond.

responseStatus Property Map

The response from the worker for this attempt. If response_time is unset, then the task has not been attempted or is currently running and the response_status field is meaningless.

responseTime String

The time that this attempt response was received. response_time will be truncated to the nearest microsecond.

scheduleTime String

The time that this attempt was scheduled. schedule_time will be truncated to the nearest microsecond.

Body string

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

Headers Dictionary<string, string>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

HttpMethod string

The HTTP method to use for the request. The default is POST.

OauthToken Pulumi.GoogleNative.CloudTasks.V2.Inputs.OAuthTokenResponse

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

OidcToken Pulumi.GoogleNative.CloudTasks.V2.Inputs.OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

Url string

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

Body string

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

Headers map[string]string

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

HttpMethod string

The HTTP method to use for the request. The default is POST.

OauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

OidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

Url string

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

body String

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

headers Map<String,String>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

httpMethod String

The HTTP method to use for the request. The default is POST.

oauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

url String

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

body string

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

headers {[key: string]: string}

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

httpMethod string

The HTTP method to use for the request. The default is POST.

oauthToken OAuthTokenResponse

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

url string

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

body str

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

headers Mapping[str, str]

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

http_method str

The HTTP method to use for the request. The default is POST.

oauth_token OAuthTokenResponse

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidc_token OidcTokenResponse

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

url str

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

body String

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

headers Map<String>

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is: * Host: This will be computed by Cloud Tasks and derived from HttpRequest.url. * Content-Length: This will be computed by Cloud Tasks. * User-Agent: This will be set to "Google-Cloud-Tasks". * X-Google-*: Google use only. * X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

httpMethod String

The HTTP method to use for the request. The default is POST.

oauthToken Property Map

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

oidcToken Property Map

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

url String

The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

Scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

ServiceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

ServiceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope String

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail String

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail string

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope str

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

service_account_email str

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

scope String

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

serviceAccountEmail String

Service account email to be used for generating OAuth token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

ServiceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

ServiceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience String

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail String

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail string

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience str

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

service_account_email str

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

audience String

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

serviceAccountEmail String

Service account email to be used for generating OIDC token. The service account must be within the same project as the queue. The caller must have iam.serviceAccounts.actAs permission for the service account.

Code int

The status code, which should be an enum value of google.rpc.Code.

Details List<ImmutableDictionary<string, string>>

A list of messages that carry the error details. There is a common set of message types for APIs to use.

Message string

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

Code int

The status code, which should be an enum value of google.rpc.Code.

Details []map[string]string

A list of messages that carry the error details. There is a common set of message types for APIs to use.

Message string

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

code Integer

The status code, which should be an enum value of google.rpc.Code.

details List<Map<String,String>>

A list of messages that carry the error details. There is a common set of message types for APIs to use.

message String

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

code number

The status code, which should be an enum value of google.rpc.Code.

details {[key: string]: string}[]

A list of messages that carry the error details. There is a common set of message types for APIs to use.

message string

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

code int

The status code, which should be an enum value of google.rpc.Code.

details Sequence[Mapping[str, str]]

A list of messages that carry the error details. There is a common set of message types for APIs to use.

message str

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

code Number

The status code, which should be an enum value of google.rpc.Code.

details List<Map<String>>

A list of messages that carry the error details. There is a common set of message types for APIs to use.

message String

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.