AWS Native v0.109.0, Jun 26 24

AWS Native is in preview. AWS Classic is fully supported.

AWS Native v0.109.0 published on Wednesday, Jun 26, 2024 by Pulumi

pulumi/pulumi-aws-native

aws-native.ecs.Service

Explore with Pulumi AI

AWS Native is in preview. AWS Classic is fully supported.

AWS Native v0.109.0 published on Wednesday, Jun 26, 2024 by Pulumi

pulumi/pulumi-aws-native

The AWS::ECS::Service resource creates an Amazon Elastic Container Service (Amazon ECS) service that runs and maintains the requested number of tasks and associated load balancers. The stack update fails if you change any properties that require replacement and at least one Amazon ECS Service Connect ServiceConnectService is configured. This is because AWS CloudFormation creates the replacement service first, but each ServiceConnectService must have a name that is unique in the namespace. Starting April 15, 2023, AWS; will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, ECS, or EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

Create Service Resource

Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

Constructor syntax

new Service(name: string, args?: ServiceArgs, opts?: CustomResourceOptions);

@overload
def Service(resource_name: str,
            args: Optional[ServiceArgs] = None,
            opts: Optional[ResourceOptions] = None)

@overload
def Service(resource_name: str,
            opts: Optional[ResourceOptions] = None,
            capacity_provider_strategy: Optional[Sequence[ServiceCapacityProviderStrategyItemArgs]] = None,
            cluster: Optional[str] = None,
            deployment_configuration: Optional[ServiceDeploymentConfigurationArgs] = None,
            deployment_controller: Optional[ServiceDeploymentControllerArgs] = None,
            desired_count: Optional[int] = None,
            enable_ecs_managed_tags: Optional[bool] = None,
            enable_execute_command: Optional[bool] = None,
            health_check_grace_period_seconds: Optional[int] = None,
            launch_type: Optional[ServiceLaunchType] = None,
            load_balancers: Optional[Sequence[ServiceLoadBalancerArgs]] = None,
            network_configuration: Optional[ServiceNetworkConfigurationArgs] = None,
            placement_constraints: Optional[Sequence[ServicePlacementConstraintArgs]] = None,
            placement_strategies: Optional[Sequence[ServicePlacementStrategyArgs]] = None,
            platform_version: Optional[str] = None,
            propagate_tags: Optional[ServicePropagateTags] = None,
            role: Optional[str] = None,
            scheduling_strategy: Optional[ServiceSchedulingStrategy] = None,
            service_connect_configuration: Optional[ServiceConnectConfigurationArgs] = None,
            service_name: Optional[str] = None,
            service_registries: Optional[Sequence[ServiceRegistryArgs]] = None,
            tags: Optional[Sequence[_root_inputs.TagArgs]] = None,
            task_definition: Optional[str] = None,
            volume_configurations: Optional[Sequence[ServiceVolumeConfigurationArgs]] = None)

func NewService(ctx *Context, name string, args *ServiceArgs, opts ...ResourceOption) (*Service, error)

public Service(string name, ServiceArgs? args = null, CustomResourceOptions? opts = null)

public Service(String name, ServiceArgs args)
public Service(String name, ServiceArgs args, CustomResourceOptions options)

type: aws-native:ecs:Service
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

Parameters

name string: The unique name of the resource.
args ServiceArgs: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

resource_name str: The unique name of the resource.
args ServiceArgs: The arguments to resource properties.
opts ResourceOptions: Bag of options to control resource's behavior.

ctx Context: Context object for the current deployment.
name string: The unique name of the resource.
args ServiceArgs: The arguments to resource properties.
opts ResourceOption: Bag of options to control resource's behavior.

name string: The unique name of the resource.
args ServiceArgs: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

name String: The unique name of the resource.
args ServiceArgs: The arguments to resource properties.
options CustomResourceOptions: Bag of options to control resource's behavior.

Service Resource Properties

To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

Inputs

The Service resource accepts the following input properties:

CapacityProviderStrategy List<Pulumi.AwsNative.Ecs.Inputs.ServiceCapacityProviderStrategyItem>

The capacity provider strategy to use for the service. If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used. A capacity provider strategy may contain a maximum of 6 capacity providers.

Cluster string

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

DeploymentConfiguration Pulumi.AwsNative.Ecs.Inputs.ServiceDeploymentConfiguration

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

DeploymentController Pulumi.AwsNative.Ecs.Inputs.ServiceDeploymentController

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

DesiredCount int

The number of instantiations of the specified task definition to place and keep running in your service. For new services, if a desired count is not specified, a default value of 1 is used. When using the DAEMON scheduling strategy, the desired count is not required. For existing services, if a desired count is not specified, it is omitted from the operation.

EnableEcsManagedTags bool

Specifies whether to turn on Amazon ECS managed tags for the tasks within the service. For more information, see Tagging your Amazon ECS resources in the Amazon Elastic Container Service Developer Guide. When you use Amazon ECS managed tags, you need to set the propagateTags request parameter.

EnableExecuteCommand bool

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

HealthCheckGracePeriodSeconds int

The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. This is only used when your service is configured to use a load balancer. If your service has a load balancer defined and you don't specify a health check grace period value, the default value of 0 is used. If you do not use an Elastic Load Balancing, we recommend that you use the startPeriod in the task definition health check parameters. For more information, see Health check. If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 2,147,483,647 seconds (about 69 years). During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.

LaunchType Pulumi.AwsNative.Ecs.ServiceLaunchType

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

LoadBalancers List<Pulumi.AwsNative.Ecs.Inputs.ServiceLoadBalancer>

A list of load balancer objects to associate with the service. If you specify the Role property, LoadBalancers must be specified as well. For information about the number of load balancers that you can specify per service, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide.

NetworkConfiguration Pulumi.AwsNative.Ecs.Inputs.ServiceNetworkConfiguration

The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.

PlacementConstraints List<Pulumi.AwsNative.Ecs.Inputs.ServicePlacementConstraint>

An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.

PlacementStrategies List<Pulumi.AwsNative.Ecs.Inputs.ServicePlacementStrategy>

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

PlatformVersion string

The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the LATEST platform version is used. For more information, see platform versions in the Amazon Elastic Container Service Developer Guide.

PropagateTags Pulumi.AwsNative.Ecs.ServicePropagateTags

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action. The default is NONE.

Role string

The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition doesn't use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter. If your account has already created the Amazon ECS service-linked role, that role is used for your service unless you specify a role here. The service-linked role is required if your task definition uses the awsvpc network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you don't specify a role here. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide. If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

SchedulingStrategy Pulumi.AwsNative.Ecs.ServiceSchedulingStrategy

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

ServiceConnectConfiguration Pulumi.AwsNative.Ecs.Inputs.ServiceConnectConfiguration

The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace. Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

ServiceName string

The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions. The stack update fails if you change any properties that require replacement and the ServiceName is configured. This is because AWS CloudFormation creates the replacement service first, but each ServiceName must be unique in the cluster.

ServiceRegistries List<Pulumi.AwsNative.Ecs.Inputs.ServiceRegistry>

The details of the service discovery registry to associate with this service. For more information, see Service discovery. Each service may be associated with one service registry. Multiple service registries for each service isn't supported.

Tags List<Pulumi.AwsNative.Inputs.Tag>

The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well. The following basic restrictions apply to tags:

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

TaskDefinition string

The family and revision (family:revision) or full ARN of the task definition to run in your service. If a revision isn't specified, the latest ACTIVE revision is used. A task definition must be specified if the service uses either the ECS or CODE_DEPLOY deployment controllers. For more information about deployment types, see Amazon ECS deployment types.

VolumeConfigurations List<Pulumi.AwsNative.Ecs.Inputs.ServiceVolumeConfiguration>

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

CapacityProviderStrategy []ServiceCapacityProviderStrategyItemArgs

Cluster string

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

DeploymentConfiguration ServiceDeploymentConfigurationArgs

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

DeploymentController ServiceDeploymentControllerArgs

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

DesiredCount int

EnableEcsManagedTags bool

EnableExecuteCommand bool

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

HealthCheckGracePeriodSeconds int

LaunchType ServiceLaunchType

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

LoadBalancers []ServiceLoadBalancerArgs

NetworkConfiguration ServiceNetworkConfigurationArgs

PlacementConstraints []ServicePlacementConstraintArgs

PlacementStrategies []ServicePlacementStrategyArgs

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

PlatformVersion string

PropagateTags ServicePropagateTags

Role string

SchedulingStrategy ServiceSchedulingStrategy

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

ServiceConnectConfiguration ServiceConnectConfigurationArgs

ServiceName string

ServiceRegistries []ServiceRegistryArgs

Tags TagArgs

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

TaskDefinition string

VolumeConfigurations []ServiceVolumeConfigurationArgs

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

capacityProviderStrategy List<ServiceCapacityProviderStrategyItem>

cluster String

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

deploymentConfiguration ServiceDeploymentConfiguration

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

deploymentController ServiceDeploymentController

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

desiredCount Integer

enableEcsManagedTags Boolean

enableExecuteCommand Boolean

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

healthCheckGracePeriodSeconds Integer

launchType ServiceLaunchType

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

loadBalancers List<ServiceLoadBalancer>

networkConfiguration ServiceNetworkConfiguration

placementConstraints List<ServicePlacementConstraint>

placementStrategies List<ServicePlacementStrategy>

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

platformVersion String

propagateTags ServicePropagateTags

role String

schedulingStrategy ServiceSchedulingStrategy

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

serviceConnectConfiguration ServiceConnectConfiguration

serviceName String

serviceRegistries List<ServiceRegistry>

tags List<Tag>

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

taskDefinition String

volumeConfigurations List<ServiceVolumeConfiguration>

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

capacityProviderStrategy ServiceCapacityProviderStrategyItem[]

cluster string

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

deploymentConfiguration ServiceDeploymentConfiguration

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

deploymentController ServiceDeploymentController

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

desiredCount number

enableEcsManagedTags boolean

enableExecuteCommand boolean

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

healthCheckGracePeriodSeconds number

launchType ServiceLaunchType

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

loadBalancers ServiceLoadBalancer[]

networkConfiguration ServiceNetworkConfiguration

placementConstraints ServicePlacementConstraint[]

placementStrategies ServicePlacementStrategy[]

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

platformVersion string

propagateTags ServicePropagateTags

role string

schedulingStrategy ServiceSchedulingStrategy

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

serviceConnectConfiguration ServiceConnectConfiguration

serviceName string

serviceRegistries ServiceRegistry[]

tags Tag[]

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

taskDefinition string

volumeConfigurations ServiceVolumeConfiguration[]

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

capacity_provider_strategy Sequence[ServiceCapacityProviderStrategyItemArgs]

cluster str

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

deployment_configuration ServiceDeploymentConfigurationArgs

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

deployment_controller ServiceDeploymentControllerArgs

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

desired_count int

enable_ecs_managed_tags bool

enable_execute_command bool

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

health_check_grace_period_seconds int

launch_type ServiceLaunchType

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

load_balancers Sequence[ServiceLoadBalancerArgs]

network_configuration ServiceNetworkConfigurationArgs

placement_constraints Sequence[ServicePlacementConstraintArgs]

placement_strategies Sequence[ServicePlacementStrategyArgs]

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

platform_version str

propagate_tags ServicePropagateTags

role str

scheduling_strategy ServiceSchedulingStrategy

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

service_connect_configuration ServiceConnectConfigurationArgs

service_name str

service_registries Sequence[ServiceRegistryArgs]

tags Sequence[TagArgs]

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

task_definition str

volume_configurations Sequence[ServiceVolumeConfigurationArgs]

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

capacityProviderStrategy List<Property Map>

cluster String

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

deploymentConfiguration Property Map

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

deploymentController Property Map

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

desiredCount Number

enableEcsManagedTags Boolean

enableExecuteCommand Boolean

Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

healthCheckGracePeriodSeconds Number

launchType "EC2" | "FARGATE" | "EXTERNAL"

The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

loadBalancers List<Property Map>

networkConfiguration Property Map

placementConstraints List<Property Map>

placementStrategies List<Property Map>

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

platformVersion String

propagateTags "SERVICE" | "TASK_DEFINITION"

role String

schedulingStrategy "DAEMON" | "REPLICA"

The scheduling strategy to use for the service. For more information, see Services. There are two service scheduler strategies available:

REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

serviceConnectConfiguration Property Map

serviceName String

serviceRegistries List<Property Map>

tags List<Property Map>

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

taskDefinition String

volumeConfigurations List<Property Map>

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

Outputs

All input properties are implicitly available as output properties. Additionally, the Service resource produces the following output properties:

Id string: The provider-assigned unique ID for this managed resource.
Name string: The name of the Amazon ECS service, such as sample-webapp .
ServiceArn string: Not currently supported in AWS CloudFormation .

Id string: The provider-assigned unique ID for this managed resource.
Name string: The name of the Amazon ECS service, such as sample-webapp .
ServiceArn string: Not currently supported in AWS CloudFormation .

id String: The provider-assigned unique ID for this managed resource.
name String: The name of the Amazon ECS service, such as sample-webapp .
serviceArn String: Not currently supported in AWS CloudFormation .

id string: The provider-assigned unique ID for this managed resource.
name string: The name of the Amazon ECS service, such as sample-webapp .
serviceArn string: Not currently supported in AWS CloudFormation .

id str: The provider-assigned unique ID for this managed resource.
name str: The name of the Amazon ECS service, such as sample-webapp .
service_arn str: Not currently supported in AWS CloudFormation .

id String: The provider-assigned unique ID for this managed resource.
name String: The name of the Amazon ECS service, such as sample-webapp .
serviceArn String: Not currently supported in AWS CloudFormation .

Supporting Types

ServiceAwsVpcConfiguration, ServiceAwsVpcConfigurationArgs

AssignPublicIp Pulumi.AwsNative.Ecs.ServiceAwsVpcConfigurationAssignPublicIp: Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
SecurityGroups List<string>: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
Subnets List<string>: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

AssignPublicIp ServiceAwsVpcConfigurationAssignPublicIp: Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
SecurityGroups []string: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
Subnets []string: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

assignPublicIp ServiceAwsVpcConfigurationAssignPublicIp: Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
securityGroups List<String>: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
subnets List<String>: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

assignPublicIp ServiceAwsVpcConfigurationAssignPublicIp: Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
securityGroups string[]: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
subnets string[]: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

assign_public_ip ServiceAwsVpcConfigurationAssignPublicIp: Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
security_groups Sequence[str]: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
subnets Sequence[str]: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

assignPublicIp "DISABLED" | "ENABLED": Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
securityGroups List<String>: The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per AwsVpcConfiguration. All specified security groups must be from the same VPC.
subnets List<String>: The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per AwsVpcConfiguration. All specified subnets must be from the same VPC.

ServiceAwsVpcConfigurationAssignPublicIp, ServiceAwsVpcConfigurationAssignPublicIpArgs

Disabled: DISABLED
Enabled: ENABLED

ServiceAwsVpcConfigurationAssignPublicIpDisabled: DISABLED
ServiceAwsVpcConfigurationAssignPublicIpEnabled: ENABLED

Disabled: DISABLED
Enabled: ENABLED

Disabled: DISABLED
Enabled: ENABLED

DISABLED: DISABLED
ENABLED: ENABLED

"DISABLED": DISABLED
"ENABLED": ENABLED

ServiceCapacityProviderStrategyItem, ServiceCapacityProviderStrategyItemArgs

Base int: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
CapacityProvider string: The short name of the capacity provider.
Weight int: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

Base int: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
CapacityProvider string: The short name of the capacity provider.
Weight int: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

base Integer: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
capacityProvider String: The short name of the capacity provider.
weight Integer: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

base number: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
capacityProvider string: The short name of the capacity provider.
weight number: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

base int: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
capacity_provider str: The short name of the capacity provider.
weight int: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

base Number: The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
capacityProvider String: The short name of the capacity provider.
weight Number: The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied. If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail. An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.

ServiceConnectClientAlias, ServiceConnectClientAliasArgs

Port int: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
DnsName string: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

Port int: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
DnsName string: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

port Integer: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
dnsName String: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

port number: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
dnsName string: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

port int: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
dns_name str: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

port Number: The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace. To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
dnsName String: The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen. If this parameter isn't specified, the default value of discoveryName.namespace is used. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace. To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

ServiceConnectConfiguration, ServiceConnectConfigurationArgs

Enabled bool

Specifies whether to use Service Connect with this service.

LogConfiguration Pulumi.AwsNative.Ecs.Inputs.ServiceLogConfiguration

The log configuration for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. By default, containers use the same logging driver that the Docker daemon uses. However, the container might use a different logging driver than the Docker daemon by specifying a log driver configuration in the container definition. For more information about the options for different supported log drivers, see Configure logging drivers in the Docker documentation. Understand the following when specifying a log configuration for your containers.

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

Namespace string

The namespace name or full Amazon Resource Name (ARN) of the CMAPlong namespace for use with Service Connect. The namespace must be in the same AWS Region as the Amazon ECS service and cluster. The type of namespace doesn't affect Service Connect. For more information about CMAPlong, see Working with Services in the Developer Guide.

Services List<Pulumi.AwsNative.Ecs.Inputs.ServiceConnectService>

The list of Service Connect service objects. These are names and aliases (also known as endpoints) that are used by other Amazon ECS services to connect to this service. This field is not required for a "client" Amazon ECS service that's a member of a namespace only to connect to other services within the namespace. An example of this would be a frontend application that accepts incoming requests from either a load balancer that's attached to the service or by other means. An object selects a port from the task definition, assigns a name for the CMAPlong service, and a list of aliases (endpoints) and ports for client applications to refer to this service.

Enabled bool

Specifies whether to use Service Connect with this service.

LogConfiguration ServiceLogConfiguration

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

Namespace string

Services []ServiceConnectService

enabled Boolean

Specifies whether to use Service Connect with this service.

logConfiguration ServiceLogConfiguration

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

namespace String

services List<ServiceConnectService>

enabled boolean

Specifies whether to use Service Connect with this service.

logConfiguration ServiceLogConfiguration

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

namespace string

services ServiceConnectService[]

enabled bool

Specifies whether to use Service Connect with this service.

log_configuration ServiceLogConfiguration

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

namespace str

services Sequence[ServiceConnectService]

enabled Boolean

Specifies whether to use Service Connect with this service.

logConfiguration Property Map

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.
For tasks that are on FARGATElong, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

namespace String

services List<Property Map>

ServiceConnectService, ServiceConnectServiceArgs

PortName string: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
ClientAliases List<Pulumi.AwsNative.Ecs.Inputs.ServiceConnectClientAlias>: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
DiscoveryName string: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
IngressPortOverride int: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
Timeout Pulumi.AwsNative.Ecs.Inputs.ServiceTimeoutConfiguration: A reference to an object that represents the configured timeouts for Service Connect.
Tls Pulumi.AwsNative.Ecs.Inputs.ServiceConnectTlsConfiguration: A reference to an object that represents a Transport Layer Security (TLS) configuration.

PortName string: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
ClientAliases []ServiceConnectClientAlias: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
DiscoveryName string: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
IngressPortOverride int: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
Timeout ServiceTimeoutConfiguration: A reference to an object that represents the configured timeouts for Service Connect.
Tls ServiceConnectTlsConfiguration: A reference to an object that represents a Transport Layer Security (TLS) configuration.

portName String: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
clientAliases List<ServiceConnectClientAlias>: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
discoveryName String: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
ingressPortOverride Integer: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
timeout ServiceTimeoutConfiguration: A reference to an object that represents the configured timeouts for Service Connect.
tls ServiceConnectTlsConfiguration: A reference to an object that represents a Transport Layer Security (TLS) configuration.

portName string: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
clientAliases ServiceConnectClientAlias[]: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
discoveryName string: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
ingressPortOverride number: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
timeout ServiceTimeoutConfiguration: A reference to an object that represents the configured timeouts for Service Connect.
tls ServiceConnectTlsConfiguration: A reference to an object that represents a Transport Layer Security (TLS) configuration.

port_name str: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
client_aliases Sequence[ServiceConnectClientAlias]: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
discovery_name str: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
ingress_port_override int: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
timeout ServiceTimeoutConfiguration: A reference to an object that represents the configured timeouts for Service Connect.
tls ServiceConnectTlsConfiguration: A reference to an object that represents a Transport Layer Security (TLS) configuration.

portName String: The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.
clientAliases List<Property Map>: The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1. Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service. Each name and port mapping must be unique within the namespace. For each ServiceConnectService, you must provide at least one clientAlias with one port.
discoveryName String: The discoveryName is the name of the new CMAP service that Amazon ECS creates for this Amazon ECS service. This must be unique within the CMAP namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen. If the discoveryName isn't specified, the port mapping name from the task definition is used in portName.namespace.
ingressPortOverride Number: The port number for the Service Connect proxy to listen on. Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service. In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.
timeout Property Map: A reference to an object that represents the configured timeouts for Service Connect.
tls Property Map: A reference to an object that represents a Transport Layer Security (TLS) configuration.

ServiceConnectTlsCertificateAuthority, ServiceConnectTlsCertificateAuthorityArgs

AwsPcaAuthorityArn string: The ARN of the AWS Private Certificate Authority certificate.

AwsPcaAuthorityArn string: The ARN of the AWS Private Certificate Authority certificate.

awsPcaAuthorityArn String: The ARN of the AWS Private Certificate Authority certificate.

awsPcaAuthorityArn string: The ARN of the AWS Private Certificate Authority certificate.

aws_pca_authority_arn str: The ARN of the AWS Private Certificate Authority certificate.

awsPcaAuthorityArn String: The ARN of the AWS Private Certificate Authority certificate.

ServiceConnectTlsConfiguration, ServiceConnectTlsConfigurationArgs

IssuerCertificateAuthority Pulumi.AwsNative.Ecs.Inputs.ServiceConnectTlsCertificateAuthority: The signer certificate authority.
KmsKey string: The AWS Key Management Service key.
RoleArn string: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

IssuerCertificateAuthority ServiceConnectTlsCertificateAuthority: The signer certificate authority.
KmsKey string: The AWS Key Management Service key.
RoleArn string: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

issuerCertificateAuthority ServiceConnectTlsCertificateAuthority: The signer certificate authority.
kmsKey String: The AWS Key Management Service key.
roleArn String: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

issuerCertificateAuthority ServiceConnectTlsCertificateAuthority: The signer certificate authority.
kmsKey string: The AWS Key Management Service key.
roleArn string: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

issuer_certificate_authority ServiceConnectTlsCertificateAuthority: The signer certificate authority.
kms_key str: The AWS Key Management Service key.
role_arn str: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

issuerCertificateAuthority Property Map: The signer certificate authority.
kmsKey String: The AWS Key Management Service key.
roleArn String: The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.

ServiceDeploymentAlarms, ServiceDeploymentAlarmsArgs

AlarmNames List<string>: One or more CloudWatch alarm names. Use a "," to separate the alarms.
Enable bool: Determines whether to use the CloudWatch alarm option in the service deployment process.
Rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

AlarmNames []string: One or more CloudWatch alarm names. Use a "," to separate the alarms.
Enable bool: Determines whether to use the CloudWatch alarm option in the service deployment process.
Rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

alarmNames List<String>: One or more CloudWatch alarm names. Use a "," to separate the alarms.
enable Boolean: Determines whether to use the CloudWatch alarm option in the service deployment process.
rollback Boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

alarmNames string[]: One or more CloudWatch alarm names. Use a "," to separate the alarms.
enable boolean: Determines whether to use the CloudWatch alarm option in the service deployment process.
rollback boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

alarm_names Sequence[str]: One or more CloudWatch alarm names. Use a "," to separate the alarms.
enable bool: Determines whether to use the CloudWatch alarm option in the service deployment process.
rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

alarmNames List<String>: One or more CloudWatch alarm names. Use a "," to separate the alarms.
enable Boolean: Determines whether to use the CloudWatch alarm option in the service deployment process.
rollback Boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

ServiceDeploymentCircuitBreaker, ServiceDeploymentCircuitBreakerArgs

Enable bool: Determines whether to use the deployment circuit breaker logic for the service.
Rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

Enable bool: Determines whether to use the deployment circuit breaker logic for the service.
Rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

enable Boolean: Determines whether to use the deployment circuit breaker logic for the service.
rollback Boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

enable boolean: Determines whether to use the deployment circuit breaker logic for the service.
rollback boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

enable bool: Determines whether to use the deployment circuit breaker logic for the service.
rollback bool: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

enable Boolean: Determines whether to use the deployment circuit breaker logic for the service.
rollback Boolean: Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

ServiceDeploymentConfiguration, ServiceDeploymentConfigurationArgs

Alarms Pulumi.AwsNative.Ecs.Inputs.ServiceDeploymentAlarms

Information about the CloudWatch alarms.

DeploymentCircuitBreaker Pulumi.AwsNative.Ecs.Inputs.ServiceDeploymentCircuitBreaker

The deployment circuit breaker can only be used for services using the rolling update (ECS) deployment type. The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If you use the deployment circuit breaker, a service deployment will transition to a failed state and stop launching new tasks. If you use the rollback option, when a service deployment fails, the service is rolled back to the last deployment that completed successfully. For more information, see Rolling update in the Amazon Elastic Container Service Developer Guide

MaximumPercent int

If a service is using the rolling update (ECS) deployment type, the maximumPercent parameter represents an upper limit on the number of your service's tasks that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desiredCount (rounded down to the nearest integer). This parameter enables you to define the deployment batch size. For example, if your service is using the REPLICA service scheduler and has a desiredCount of four tasks and a maximumPercent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default maximumPercent value for a service using the REPLICA service scheduler is 200%. If a service is using either the blue/green (CODE_DEPLOY) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.

MinimumHealthyPercent int

If a service is using the rolling update (ECS) deployment type, the minimumHealthyPercent represents a lower limit on the number of your service's tasks that must remain in the RUNNING state during a deployment, as a percentage of the desiredCount (rounded up to the nearest integer). This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desiredCount of four tasks and a minimumHealthyPercent of 50%, the service scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. For services that do not use a load balancer, the following should be noted:

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

If a service is using either the blue/green (CODE_DEPLOY) or EXTERNAL deployment types and is running tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If a service is using either the blue/green (CODE_DEPLOY) or EXTERNAL deployment types and is running tasks that use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.

Alarms ServiceDeploymentAlarms

Information about the CloudWatch alarms.

DeploymentCircuitBreaker ServiceDeploymentCircuitBreaker

MaximumPercent int

MinimumHealthyPercent int

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

alarms ServiceDeploymentAlarms

Information about the CloudWatch alarms.

deploymentCircuitBreaker ServiceDeploymentCircuitBreaker

maximumPercent Integer

minimumHealthyPercent Integer

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

alarms ServiceDeploymentAlarms

Information about the CloudWatch alarms.

deploymentCircuitBreaker ServiceDeploymentCircuitBreaker

maximumPercent number

minimumHealthyPercent number

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

alarms ServiceDeploymentAlarms

Information about the CloudWatch alarms.

deployment_circuit_breaker ServiceDeploymentCircuitBreaker

maximum_percent int

minimum_healthy_percent int

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

alarms Property Map

Information about the CloudWatch alarms.

deploymentCircuitBreaker Property Map

maximumPercent Number

minimumHealthyPercent Number

A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

For services that do use a load balancer, the following should be noted:

If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

ServiceDeploymentController, ServiceDeploymentControllerArgs

Type Pulumi.AwsNative.Ecs.ServiceDeploymentControllerType

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

Type ServiceDeploymentControllerType

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

type ServiceDeploymentControllerType

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

type ServiceDeploymentControllerType

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

type ServiceDeploymentControllerType

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

type "CODE_DEPLOY" | "ECS" | "EXTERNAL"

The deployment controller type to use. There are three deployment controller types available:

ECS The rolling update (ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. + CODE_DEPLOY The blue/green (CODE_DEPLOY) deployment type uses the blue/green deployment model powered by , which allows you to verify a new deployment of a service before sending production traffic to it. + EXTERNAL The external (EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

ServiceDeploymentControllerType, ServiceDeploymentControllerTypeArgs

CodeDeploy: CODE_DEPLOY
Ecs: ECS
External: EXTERNAL

ServiceDeploymentControllerTypeCodeDeploy: CODE_DEPLOY
ServiceDeploymentControllerTypeEcs: ECS
ServiceDeploymentControllerTypeExternal: EXTERNAL

CodeDeploy: CODE_DEPLOY
Ecs: ECS
External: EXTERNAL

CodeDeploy: CODE_DEPLOY
Ecs: ECS
External: EXTERNAL

CODE_DEPLOY: CODE_DEPLOY
ECS: ECS
EXTERNAL: EXTERNAL

"CODE_DEPLOY": CODE_DEPLOY
"ECS": ECS
"EXTERNAL": EXTERNAL

ServiceEbsTagSpecification, ServiceEbsTagSpecificationArgs

ResourceType string: The type of volume resource.
PropagateTags Pulumi.AwsNative.Ecs.ServiceEbsTagSpecificationPropagateTags: Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
Tags List<Pulumi.AwsNative.Ecs.Inputs.ServiceTag>: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

ResourceType string: The type of volume resource.
PropagateTags ServiceEbsTagSpecificationPropagateTags: Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
Tags []ServiceTag: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

resourceType String: The type of volume resource.
propagateTags ServiceEbsTagSpecificationPropagateTags: Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
tags List<ServiceTag>: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

resourceType string: The type of volume resource.
propagateTags ServiceEbsTagSpecificationPropagateTags: Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
tags ServiceTag[]: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

resource_type str: The type of volume resource.
propagate_tags ServiceEbsTagSpecificationPropagateTags: Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
tags Sequence[ServiceTag]: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

resourceType String: The type of volume resource.
propagateTags "SERVICE" | "TASK_DEFINITION": Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in ServiceVolumeConfiguration. If no value is specified, the tags aren't propagated.
tags List<Property Map>: The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can't be used.

ServiceEbsTagSpecificationPropagateTags, ServiceEbsTagSpecificationPropagateTagsArgs

Service: SERVICE
TaskDefinition: TASK_DEFINITION

ServiceEbsTagSpecificationPropagateTagsService: SERVICE
ServiceEbsTagSpecificationPropagateTagsTaskDefinition: TASK_DEFINITION

Service: SERVICE
TaskDefinition: TASK_DEFINITION

Service: SERVICE
TaskDefinition: TASK_DEFINITION

SERVICE: SERVICE
TASK_DEFINITION: TASK_DEFINITION

"SERVICE": SERVICE
"TASK_DEFINITION": TASK_DEFINITION

ServiceLaunchType, ServiceLaunchTypeArgs

Ec2: EC2
Fargate: FARGATE
External: EXTERNAL

ServiceLaunchTypeEc2: EC2
ServiceLaunchTypeFargate: FARGATE
ServiceLaunchTypeExternal: EXTERNAL

Ec2: EC2
Fargate: FARGATE
External: EXTERNAL

Ec2: EC2
Fargate: FARGATE
External: EXTERNAL

EC2: EC2
FARGATE: FARGATE
EXTERNAL: EXTERNAL

"EC2": EC2
"FARGATE": FARGATE
"EXTERNAL": EXTERNAL

ServiceLoadBalancer, ServiceLoadBalancerArgs

ContainerName string: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
ContainerPort int: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
LoadBalancerName string: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
TargetGroupArn string: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

ContainerName string: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
ContainerPort int: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
LoadBalancerName string: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
TargetGroupArn string: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

containerName String: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
containerPort Integer: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
loadBalancerName String: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
targetGroupArn String: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

containerName string: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
containerPort number: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
loadBalancerName string: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
targetGroupArn string: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

container_name str: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
container_port int: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
load_balancer_name str: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
target_group_arn str: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

containerName String: The name of the container (as it appears in a container definition) to associate with the load balancer. You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
containerPort Number: The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on the hostPort of the port mapping.
loadBalancerName String: The name of the load balancer to associate with the Amazon ECS service or task set. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
targetGroupArn String: The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set. A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide. For services using the CODE_DEPLOY deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide. If your service's task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

ServiceLogConfiguration, ServiceLogConfigurationArgs

LogDriver string: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
Options Dictionary<string, string>: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
SecretOptions List<Pulumi.AwsNative.Ecs.Inputs.ServiceSecret>: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

LogDriver string: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
Options map[string]string: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
SecretOptions []ServiceSecret: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

logDriver String: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
options Map<String,String>: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
secretOptions List<ServiceSecret>: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

logDriver string: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
options {[key: string]: string}: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
secretOptions ServiceSecret[]: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

log_driver str: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
options Mapping[str, str]: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
secret_options Sequence[ServiceSecret]: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

logDriver String: The log driver to use for the container. For tasks on FARGATElong, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide. If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
options Map<String>: The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
secretOptions List<Property Map>: The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

ServiceManagedEbsVolumeConfiguration, ServiceManagedEbsVolumeConfigurationArgs

RoleArn string

The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your AWS infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

Encrypted bool

Indicates whether the volume should be encrypted. If no value is specified, encryption is turned on by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

FilesystemType string

The Linux filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the task will fail to start. The available filesystem types are ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

Iops int

The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. The following are the supported values for each volume type.

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types. This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

KmsKeyId string

The Amazon Resource Name (ARN) identifier of the AWS Key Management Service key to use for Amazon EBS encryption. When encryption is turned on and no AWS Key Management Service key is specified, the default AWS managed key for Amazon EBS volumes is used. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference. AWS authenticates the AWS Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

SizeInGiB int

The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference. The following are the supported volume size values for each volume type.

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

SnapshotId string

The snapshot that Amazon ECS uses to create the volume. You must specify either a snapshot ID or a volume size. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

TagSpecifications List<Pulumi.AwsNative.Ecs.Inputs.ServiceEbsTagSpecification>

The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

Throughput int

The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference. This parameter is only supported for the gp3 volume type.

VolumeType string

The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide. The following are the supported volume types.

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

RoleArn string

Encrypted bool

FilesystemType string

Iops int

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

KmsKeyId string

SizeInGiB int

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

SnapshotId string

TagSpecifications []ServiceEbsTagSpecification

Throughput int

VolumeType string

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

roleArn String

encrypted Boolean

filesystemType String

iops Integer

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

kmsKeyId String

sizeInGiB Integer

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

snapshotId String

tagSpecifications List<ServiceEbsTagSpecification>

throughput Integer

volumeType String

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

roleArn string

encrypted boolean

filesystemType string

iops number

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

kmsKeyId string

sizeInGiB number

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

snapshotId string

tagSpecifications ServiceEbsTagSpecification[]

throughput number

volumeType string

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

role_arn str

encrypted bool

filesystem_type str

iops int

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

kms_key_id str

size_in_gi_b int

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

snapshot_id str

tag_specifications Sequence[ServiceEbsTagSpecification]

throughput int

volume_type str

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

roleArn String

encrypted Boolean

filesystemType String

iops Number

gp3: 3,000 - 16,000 IOPS
io1: 100 - 64,000 IOPS
io2: 100 - 256,000 IOPS

kmsKeyId String

sizeInGiB Number

gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024

snapshotId String

tagSpecifications List<Property Map>

throughput Number

volumeType String

General Purpose SSD: gp2|gp3
Provisioned IOPS SSD: io1|io2
Throughput Optimized HDD: st1
Cold HDD: sc1
Magnetic: standard The magnetic volume type is not supported on Fargate.

ServiceNetworkConfiguration, ServiceNetworkConfigurationArgs

AwsvpcConfiguration Pulumi.AwsNative.Ecs.Inputs.ServiceAwsVpcConfiguration: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

AwsvpcConfiguration ServiceAwsVpcConfiguration: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

awsvpcConfiguration ServiceAwsVpcConfiguration: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

awsvpcConfiguration ServiceAwsVpcConfiguration: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

awsvpc_configuration ServiceAwsVpcConfiguration: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

awsvpcConfiguration Property Map: The VPC subnets and security groups that are associated with a task. All specified subnets and security groups must be from the same VPC.

ServicePlacementConstraint, ServicePlacementConstraintArgs

Type Pulumi.AwsNative.Ecs.ServicePlacementConstraintType: The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
Expression string: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

Type ServicePlacementConstraintType: The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
Expression string: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

type ServicePlacementConstraintType: The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression String: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

type ServicePlacementConstraintType: The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression string: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

type ServicePlacementConstraintType: The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression str: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

type "distinctInstance" | "memberOf": The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression String: A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

ServicePlacementConstraintType, ServicePlacementConstraintTypeArgs

DistinctInstance: distinctInstance
MemberOf: memberOf

ServicePlacementConstraintTypeDistinctInstance: distinctInstance
ServicePlacementConstraintTypeMemberOf: memberOf

DistinctInstance: distinctInstance
MemberOf: memberOf

DistinctInstance: distinctInstance
MemberOf: memberOf

DISTINCT_INSTANCE: distinctInstance
MEMBER_OF: memberOf

"distinctInstance": distinctInstance
"memberOf": memberOf

ServicePlacementStrategy, ServicePlacementStrategyArgs

Type Pulumi.AwsNative.Ecs.ServicePlacementStrategyType: The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
Field string: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

Type ServicePlacementStrategyType: The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
Field string: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

type ServicePlacementStrategyType: The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
field String: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

type ServicePlacementStrategyType: The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
field string: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

type ServicePlacementStrategyType: The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
field str: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

type "binpack" | "random" | "spread": The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that's specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
field String: The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. For the random placement strategy, this field is not used.

ServicePlacementStrategyType, ServicePlacementStrategyTypeArgs

Binpack: binpack
Random: random
Spread: spread

ServicePlacementStrategyTypeBinpack: binpack
ServicePlacementStrategyTypeRandom: random
ServicePlacementStrategyTypeSpread: spread

Binpack: binpack
Random: random
Spread: spread

Binpack: binpack
Random: random
Spread: spread

BINPACK: binpack
RANDOM: random
SPREAD: spread

"binpack": binpack
"random": random
"spread": spread

ServicePropagateTags, ServicePropagateTagsArgs

Service: SERVICE
TaskDefinition: TASK_DEFINITION

ServicePropagateTagsService: SERVICE
ServicePropagateTagsTaskDefinition: TASK_DEFINITION

Service: SERVICE
TaskDefinition: TASK_DEFINITION

Service: SERVICE
TaskDefinition: TASK_DEFINITION

SERVICE: SERVICE
TASK_DEFINITION: TASK_DEFINITION

"SERVICE": SERVICE
"TASK_DEFINITION": TASK_DEFINITION

ServiceRegistry, ServiceRegistryArgs

ContainerName string: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
ContainerPort int: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
Port int: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
RegistryArn string: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

ContainerName string: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
ContainerPort int: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
Port int: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
RegistryArn string: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

containerName String: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
containerPort Integer: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
port Integer: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
registryArn String: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

containerName string: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
containerPort number: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
port number: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
registryArn string: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

container_name str: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
container_port int: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
port int: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
registry_arn str: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

containerName String: The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
containerPort Number: The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can't specify both.
port Number: The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.
registryArn String: The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is CMAP. For more information, see CreateService.

ServiceSchedulingStrategy, ServiceSchedulingStrategyArgs

Daemon: DAEMON
Replica: REPLICA

ServiceSchedulingStrategyDaemon: DAEMON
ServiceSchedulingStrategyReplica: REPLICA

Daemon: DAEMON
Replica: REPLICA

Daemon: DAEMON
Replica: REPLICA

DAEMON: DAEMON
REPLICA: REPLICA

"DAEMON": DAEMON
"REPLICA": REPLICA

ServiceSecret, ServiceSecretArgs

Name string: The name of the secret.
ValueFrom string: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

Name string: The name of the secret.
ValueFrom string: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

name String: The name of the secret.
valueFrom String: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

name string: The name of the secret.
valueFrom string: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

name str: The name of the secret.
value_from str: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

name String: The name of the secret.
valueFrom String: The secret to expose to the container. The supported values are either the full ARN of the ASMlong secret or the full ARN of the parameter in the SSM Parameter Store. For information about the require IAMlong permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide. If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

ServiceTag, ServiceTagArgs

Key string: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
Value string: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

Key string: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
Value string: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

key String: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value String: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

key string: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value string: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

key str: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value str: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

key String: One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value String: The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

ServiceTimeoutConfiguration, ServiceTimeoutConfigurationArgs

IdleTimeoutSeconds int: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
PerRequestTimeoutSeconds int: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

IdleTimeoutSeconds int: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
PerRequestTimeoutSeconds int: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

idleTimeoutSeconds Integer: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
perRequestTimeoutSeconds Integer: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

idleTimeoutSeconds number: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
perRequestTimeoutSeconds number: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

idle_timeout_seconds int: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
per_request_timeout_seconds int: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

idleTimeoutSeconds Number: The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout. The idleTimeout default for HTTP/HTTP2/GRPC is 5 minutes. The idleTimeout default for TCP is 1 hour.
perRequestTimeoutSeconds Number: The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn't TCP. Only idleTimeout is allowed for TCP appProtocol.

ServiceVolumeConfiguration, ServiceVolumeConfigurationArgs

Name string: The name of the volume. This value must match the volume name from the Volume object in the task definition.
ManagedEbsVolume Pulumi.AwsNative.Ecs.Inputs.ServiceManagedEbsVolumeConfiguration: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

Name string: The name of the volume. This value must match the volume name from the Volume object in the task definition.
ManagedEbsVolume ServiceManagedEbsVolumeConfiguration: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

name String: The name of the volume. This value must match the volume name from the Volume object in the task definition.
managedEbsVolume ServiceManagedEbsVolumeConfiguration: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

name string: The name of the volume. This value must match the volume name from the Volume object in the task definition.
managedEbsVolume ServiceManagedEbsVolumeConfiguration: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

name str: The name of the volume. This value must match the volume name from the Volume object in the task definition.
managed_ebs_volume ServiceManagedEbsVolumeConfiguration: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

name String: The name of the volume. This value must match the volume name from the Volume object in the task definition.
managedEbsVolume Property Map: The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

Tag, TagArgs

Key string: The key name of the tag
Value string: The value of the tag

Key string: The key name of the tag
Value string: The value of the tag

key String: The key name of the tag
value String: The value of the tag

key string: The key name of the tag
value string: The value of the tag

key str: The key name of the tag
value str: The value of the tag

key String: The key name of the tag
value String: The value of the tag

Package Details

Repository: AWS Native pulumi/pulumi-aws-native
License: Apache-2.0

AWS Native is in preview. AWS Classic is fully supported.

AWS Native v0.109.0 published on Wednesday, Jun 26, 2024 by Pulumi

pulumi/pulumi-aws-native

aws-native.ecs.Service

On this page

On this page

Create Service Resource

Constructor syntax

Parameters

Service Resource Properties

Inputs

Outputs

Supporting Types

ServiceAwsVpcConfiguration, ServiceAwsVpcConfigurationArgs

ServiceAwsVpcConfigurationAssignPublicIp, ServiceAwsVpcConfigurationAssignPublicIpArgs

ServiceCapacityProviderStrategyItem, ServiceCapacityProviderStrategyItemArgs

ServiceConnectClientAlias, ServiceConnectClientAliasArgs

ServiceConnectConfiguration, ServiceConnectConfigurationArgs

ServiceConnectService, ServiceConnectServiceArgs

ServiceConnectTlsCertificateAuthority, ServiceConnectTlsCertificateAuthorityArgs

ServiceConnectTlsConfiguration, ServiceConnectTlsConfigurationArgs

ServiceDeploymentAlarms, ServiceDeploymentAlarmsArgs

ServiceDeploymentCircuitBreaker, ServiceDeploymentCircuitBreakerArgs

ServiceDeploymentConfiguration, ServiceDeploymentConfigurationArgs

ServiceDeploymentController, ServiceDeploymentControllerArgs

ServiceDeploymentControllerType, ServiceDeploymentControllerTypeArgs

ServiceEbsTagSpecification, ServiceEbsTagSpecificationArgs

ServiceEbsTagSpecificationPropagateTags, ServiceEbsTagSpecificationPropagateTagsArgs

ServiceLaunchType, ServiceLaunchTypeArgs

ServiceLoadBalancer, ServiceLoadBalancerArgs

ServiceLogConfiguration, ServiceLogConfigurationArgs

ServiceManagedEbsVolumeConfiguration, ServiceManagedEbsVolumeConfigurationArgs

ServiceNetworkConfiguration, ServiceNetworkConfigurationArgs

ServicePlacementConstraint, ServicePlacementConstraintArgs

ServicePlacementConstraintType, ServicePlacementConstraintTypeArgs

ServicePlacementStrategy, ServicePlacementStrategyArgs

ServicePlacementStrategyType, ServicePlacementStrategyTypeArgs

ServicePropagateTags, ServicePropagateTagsArgs

ServiceRegistry, ServiceRegistryArgs

ServiceSchedulingStrategy, ServiceSchedulingStrategyArgs

ServiceSecret, ServiceSecretArgs

ServiceTag, ServiceTagArgs

ServiceTimeoutConfiguration, ServiceTimeoutConfigurationArgs

ServiceVolumeConfiguration, ServiceVolumeConfigurationArgs

Tag, TagArgs

Package Details

On this page

On this page